@article { author = {Arkani, M and Khakshournia, S and Khalafi, H and Vosoughi, N}, title = {Measurement of Prompt Neutron Decay Constant in Esfahan Light Water Subcritical Reactor Utilizing Feynman-α Analysis}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {37}, number = {2}, pages = {1-7}, year = {2016}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Diagnostic methods based on zero power reactor noise theory are very common and widely applicable in kinetic parameters and are also one of the standard diagnosis methods of nuclear reactor cores. Feynman-α method is one of these efficient methods of diagnosis. In this work, this method is employed to measure the prompt neutron decay constant of the Esfahan Light Water Subcritical Reactor (ELWSCR). The ELWSCR is a deep subcritical reactor. Therefore, the prompt neutron decay constant of the core is a large negative quantity. Using an especial data acquisition system, the prompt neutron decay constant of the core, based on the Feynman-α analysis, is estimated to be 3966±88 sec-1. The time window of 100 µs is employed in this investigation. By applying the Rossi-α method, this parameter has alrealy been reported to be 3990±177 sec-1 in references. The comparison shows that our results are in a rather good agreement with that estimated by the Rossi-α method within the range of statistical uncertainties.}, keywords = {Feynman-α Analysis,Subcritical Reactor,Prompt Neutron Decay Constant,Zero Power Reactor Nois}, title_fa = {اندازه گیری ثابت واپاشی نوترون آنی در قلب رآکتور زیربحرانی آب سبک اصفهان با استفاده از تحلیل فاینمن- آلفا}, abstract_fa = {روش­‌های شناسایی که بر پایه‌­ی تئوری نوفه‌­ی رآکتور قدرت صفر هستند، در اندازه­‌گیری پارامترهای جنبشی قلب رآکتورهای هسته­‌ای بسیار رایج، پُر کاربرد و البته از جمله روش‌­های استاندارد در شناسایی قلب رآکتورهای هسته­‌ای می­‌باشند. از جمله­‌ی آن­‌ها می­‌توان به روش کارآمد فاینمن- ­آلفا اشاره نمود. در رآکتور زیربحرانی آب­‌‌سبک اصفهان، سامانه­‌ی قلب رآکتور عمیقاً زیربحرانی است. از این‌­رو پارامتر ثابت واپاشی نوترون آنی در این سامانه، کمیت منفی بزرگی است. در این پژوهش، با استفاده از سامانه‌­ی جمع­‌آوری اطلاعات ویژه‌­ای، این پارامتر به وسیله‌­ی تحلیل فاینمن- آلفا در پنجره­‌های زمانی با قدرت تفکیک µs 100 تخمین زده شد. مقدار تجربی پارامتر ثابت واپاشی نوترون آنی در این سامانه برابر با 3990±177 sec-1 برآورد شده است. از تحلیل رُسی­- آلفا، این مقدار در مراجع برابر با 3966±88 sec-1 برای این سامانه گزارش شده است. مقایسه­‌ی نتایج به دست آمده با مقدار تخمین زده شده از روش رُسی- ­آلفا، سازگاری نسبتاً خوبی را در گستره­ی عدم قطعیت آماری به دست آمده نشان می­‌دهد.}, keywords_fa = {تحلیل فاینمن- آلفا,رآکتور زیربحرانی,ثابت واپاشی نوترون آنی,نوفه ی رآکتور قدرت صفر}, url = {https://jonsat.nstri.ir/article_111.html}, eprint = {https://jonsat.nstri.ir/article_111_85b4419e0dc33ce5bd4d326fcc6119af.pdf} } @article { author = {Bahrami-Samani, A and Yousefnia, H and Abbasi Davani, F and Afarideh, H and Jalilian, A.R and Shirvani Arani, S and Ghanadi Maragheh, M}, title = {Evaluation of Human Absorbed Dose of 177Lu-DOTA-Trastuzumab Based on its Biodistribution Studies in Rats}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {37}, number = {2}, pages = {8-15}, year = {2016}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {: In this study, Trastuzumab was labeled with 177Lu, and its dosimetric calculation was performed considering the assessment of the absorbed dose in the organs of human body. 177Lu chloride was prepared after 7 days irradiation of enriched Lu2O3 in the Tehran Research Reactor at the thermal neutron flux of 4×1013 cm-2 s-1, and the specific activity of 70-80 GBq/mg. 177Lu-DOTA-Trastuzumab was obtained with an overall radiochemical purity of >98% under the optimized conditions. Biodistribution studies of the radioimmunoconjugate in normal rats were carried up to 168 h. Relative organ mass extrapolation method was used for calculation of the human absorbed dose. Because of the highest accumulation activity in reticuloendothelial system, liver and spleen have received the maximum dose of 0.95 and 0.89 mSv/MBq, respectively.}, keywords = {Trastuzumab,177Lu,Biodistribution,Absorbed dose}, title_fa = {ارزیابی دز جذبی ترکیب لوتسیم-DOTA- تراستوزومب در اندام های بدن انسان براساس توزیع زیست شناختی آن روی موش های صحرایی}, abstract_fa = {در این پژوهش، تراستوزومب با 177Lu نشان­دار شد و مطالعات دزیمتری به منظور سنجش دز جذبی آن در اندام‌­های بدن انسان انجام گرفت. کلرید لوتسیم با پرتودهی اکسید لوتسیم غنی شده با شار نوترون گرمایی 4×1013 cm-2 s-1 به مدت 7d در رآکتور تحقیقاتی تهران با فعالیت ویژه­‌ی 70 تا GBq/mg 80 تهیه شد. ترکیب نشان­دار لوتسیم-DOTA- تراستوزومب با خلوص رادیوشیمیایی بالاتر از 98% در شرایط بهینه­‌ی نشان­‌دارسازی به دست آمد. مطالعه‌­ی توزیع زیست­‌شناختی ترکیب نشان­‌دار در موش­‌های صحرایی سالم تا 168h پس از تزریق انجام شد. برای محاسبه‌­ی دز جذب شده در انسان، از روش برون­‌یابی جرم نسبی اندام استفاده شد. به علت تجمع بالای فعالیت در سیستم رتیکولواندوتلیال، کبد و طحال بیش­ترین دز را دریافت می­‌کنند که به ترتیب، برابر با 0.95 و mSv 0.89 به ازای 1 MBq ترکیب نشان­دار تزریق شده است.}, keywords_fa = {تراستوزومب,لوتسیم-177,توزیع زیست شناختی,دز جذب شده}, url = {https://jonsat.nstri.ir/article_112.html}, eprint = {https://jonsat.nstri.ir/article_112_911c7825dbe3cbd8a794296bc9b65988.pdf} } @article { author = {Barzegar, M and Seyhoon, M and Sahari, M. A}, title = {A Study into the Effects of Gamma-Irradiation on Bioactivie Compounds, Color and Microbial Load of Saffron}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {37}, number = {2}, pages = {16-25}, year = {2016}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this study, the effects of γ-radiation on physicochemical properties of Iranian saffron (Crocus sativus L.) such as crocin (saffron color factor), kaempferol (polyphenol bioactive compounds) and safranal (the main component of volatile aromatic saffron), color paramerters a*, b*, L* and ΔEh indices and the microbial load were investigated. The saffron samples were irradiated at dosages of 0, 1, 2, 3, 4, 5 and 6 kGy by a Gammacell 220. Then, the efficient compounds were extracted and the composition and microbial load of saffron extracts were determined before and after the γ- irradiation. The results showed that in addition to decreasing the microbial content of saffron, among the 21 bioactivie compounds separated by HPLC, crocin, kaempferol and safranal content in three regions of this study were affected by the gamma irradiation. Pre- treatment of saffron with 4 and 6 kGy radiation also results in a significant (p<0.01) increase, without changes in color and bioactivie compounds. These data may suggest that  irradiation of saffron without unfavorable changes on the effective componeents results in a significant decrease in the microbial content of this product.  }, keywords = {Saffron,Gamma Irradiation,Bioactive Compounds,Microbial Load,High Performance Liquid Chromatography System (HPLC),Hunter Lab}, title_fa = {بررسی اثرات پرتو گاما بر ترکیبات زیست فعال، رنگ و بار میکروبی زعفران}, abstract_fa = {در این پژوهش، اثرات پرتو گاما بر ویژگی­‌های فیزیکی و شیمیایی زعفران ایرانی (Crocus sativus L.) مانند کروسین (عامل مؤثر در رنگ زعفران)، کامفرول (از ترکیبات زیست فعال پلی­فنولی) و سافرانال (جزء اصلی مواد فرار معطر زعفران)، رنگ شامل نمایه­‌های *L, b*, a* و ΔEh و بار میکروبی نمونه‌­های زعفران بررسی شده‌­اند. نمونه‌­های زعفران در گاماسل 220 تا دزهای °، 1، 2، 3، 4، 5 و kGy 6 پرتودهی شدند. سپس ترکیبات مؤثر آن‌ها استخراج و میزان تغییر آن و نیز بار میکروبی نمونه­‌های زعفران بررسی شدند. نتایج حاصل نشان می­‌دهد که ضمن کاهش بار میکروبی زعفران، میان 21 ترکیب زیست فعّال جدا شده به وسیله­‌ی HPLC، مقدار کروسین، کامفرول و سافرانال در سه منطقه‌­ی این مطالعه، تحت تأثیر تابش­‌دهی گاما قرار گرفتند. به طور کلی نتایج نشان می‌­دهند که پرتودهی زعفران تا دز kGy 6، بدون تأثیر نامطلوب در ترکیبات مؤثر زعفران، باعث کاهش چشم­‌گیر بار میکروبی می‌شود. هم­چنین تیمار کردن زعفران با پرتو 4 و kGy 6، منجر به افزایش چشم­‌گیر (0.01>p) یا عدم تغییر رنگ و ترکیبات زیست فعّال می­‌شوند.}, keywords_fa = {زعفران,پرتودهی,ترکیبات زیست فعال,بار میکروبی,کروماتوگرافی مایع با کارکرد بالا,هانترلب}, url = {https://jonsat.nstri.ir/article_113.html}, eprint = {https://jonsat.nstri.ir/article_113_b1ebd184fae486dc2639fa7ef80f5c25.pdf} } @article { author = {Forati Rad, H and Mohajerani, H. R and Nejat Pishkenari, M and Maleki Faresani, A and Momenzade, S and Rostam Nejad, M and Asadian, M}, title = {Investigation of Soil Corrosivity Effect on Low Radioactive Wastes Burial Casks}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {37}, number = {2}, pages = {26-36}, year = {2016}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this study, corrosion of AISI st37 steel waste casks was investigated by analyzing the physico-chemical characteristics of the soil medium. The chemical composition of soil has important effects on steel casks. Moisture, soil electrical resistivity, soluble salts, chlorides, pH, redox potential and anions and cations content, as the major parameters, influence the exterior corrosion of waste casks. To carry out this research, the corrosivity of the soil in the central desert regions of Iran has been studied using the AWWA C105 standard. In these regions, 4 samples have been collected at varied points located in the vicinity of the site, named CR1, CR2, CR3 and CR4. At first, for a better assessment of the soils corrosivity, the physical and chemical analyses were conducted on the soil and in the solutions prepared from the soil samples. Then, the rate of corrosion was measured by the weight loss and potentiodynamic polarization methods. The obtained results showed that the CR4 soil sample with the lowest electrical conductivity, compared with the other samples, has the lower corrosion rate in the whole method. Corrosion rates of the samples in this region in the 180-day weight loss method, and in the electrochemical method are equal to 0.0625 and 0.029 mm/y, respectively.}, keywords = {Waste Container Corrosion,Physico-Chemical Characteristics,Soil Electrical Conductivity,Weight Loss,Potentiodynamic Polarization}, title_fa = {بررسی اثر خورندگی خاک روی بشکه‌های دفن پسمان‌های با پرتوزایی کم}, abstract_fa = {در این مقاله، خوردگی بشکه‌های دفن پسمان‌های با پرتوزایی کم از جنس فولاد AISI st37 با تحلیل ویژگی‌های فیزیکی- شیمیایی محیط خاکی بررسی شده است. ترکیب شیمیایی خاک آثار خوردگی مهمی بر بشکه‌های فولادی دارد. عوامل اصلی که خوردگی خارجی بشکه‌های دفن پسمان را تحت تأثیر قرار می‌دهند، عبارتند از: رطوبت خاک، مقاومت الکتریکی خاک، نمک‌های محلول، کلریدها، قدرت اسیدی، پتانسیل اکسایش- کاهش و مقدار آنیون‌ها و کاتیون‌ها. در این پژوهش، میزان خورندگی خاک در مناطق کویر مرکزی ایران با استفاده از استاندارد AWWA C105 مطالعه شد. در این مناطق، چهار نمونه خاک از نقاط پیرامون محل‌های دفن پسمان جمع‌آوری و به صورت CR3, CR2, CR1 و 4CR نام­‌گذاری شدند. در ابتدا به منظور ارزیابی بهتر خورندگی خاک‌­ها، آنالیزهای فیزیکی و شیمیایی روی خاک‌ها و محلول­‌های آماده شده با خاک­‌ها انجام گرفت. سپس، نرخ خوردگی بشکه‌های فولادی با آزمایش­‌های کاهش وزنی و پلاریزاسیون پتانسیودینامیک اندازه‌گیری شد. نتایج به دست آمده نشان می­‌دهد که در تمام روش‌ها، نمونه‌ی خاک 4CR، با کم­ترین هدایت الکتریکی نسبت به خاک‌های دیگر، دارای نرخ خوردگی پایین‌تر است. سرعت خوردگی نمونه‌ها در این منطقه در روش کاهش وزنی 180- روزه و در روش الکتروشیمیایی به ترتیب برابر با 0.0625 و mm/y 0.029 است.}, keywords_fa = {خوردگی مخزن پسمان,مشخصات فیزیکی- شیمیایی,هدایت الکتریکی خاک,اتلاف وزن,پلاریزاسیون پتانسیودینامیک}, url = {https://jonsat.nstri.ir/article_114.html}, eprint = {https://jonsat.nstri.ir/article_114_4756e9c5d4add9a5406eac284b009334.pdf} } @article { author = {Moradi Gharatloo, I and Nozad Golikand, A and Bagher Fathi, M. B and Hasanzadeh, I}, title = {Electrochemical Formation of Hydride Phases on the Zirconium- 1% Niobium Alloy Used in Nuclear Fuel Cladding}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {37}, number = {2}, pages = {37-45}, year = {2016}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Investigation into the destructive effects of the hydride formation on the zirconium fuel claddings, involves working with radioactive materials. In order to avoid this problem, in this study, zirconium hydride phases were created on the Zr-1%Nb alloy (used in nuclear fuel cladding), by the electrochemical charging method. The experiments were carried out in 0.017 M NaCl aqueous solution at room temperature. The samples were analyzed by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the protective oxide layer had been destroyed, and Zr-H-Zr and Zr-H bonds were formed on the surface. In addition, by diffusion and increasing the hydrogen concentration in the bulk, ZrH2 and ZrH hydride phases had been formed in addition to the cracks in the sample, because these phases had about 10% difference in volume with the zirconium phase.}, keywords = {Fuel Claddings,Hydrogen Embrittlement,Zirconium Hydride,Electrochemical Hydrogenation}, title_fa = {تشکیل الکتروشیمیایی فازهای هیدریدی در آلیاژ زیرکونیم-1% نیوبیم مورد استفاده در غلاف سوخت هسته‌ای}, abstract_fa = {بررسی آثار مخرب تشکیل فازهای هیدریدی در غلاف‌های سوخت زیرکونیمی، مستلزم کار با مواد پرتوزا است. برای اجتناب از این کار، در این پژوهش، فازهای هیدرید زیرکونیم بر روی آلیاژ Zr-1%Nb (مورد استفاده در ساخت غلاف سوخت) به روش شارژ الکتروشیمیایی ایجاد شد. آزمایش در محلول 0.017 مولار NaCl و در دمای اتاق انجام شد. نمونه‌ها با استفاده از طیف‌سنجی تبدیل فوریه‌­ی فروسرخ (FTIR)، پراش اشعه‌ی ایکس (XRD) و میکروسکوپ الکترونی روبشی (SEM)‌ بررسی شدند. نتایج نشان داد که لایه­‌ی محافظ اکسیدی سطح آلیاژ تخریب، و پیوندهای Zr-H-Zr و Zr-H در سطح نمونه تشکیل می­شوند. هم­چنین با نفوذ هیدروژن و افزایش غلظت آن در توده­ی آلیاژ، فازهای هیدریدی ZrH و ZrH2 شکل می‌­گیرند و به دلیل اختلاف حدود 10 درصدی حجم این فازها با زیرکونیم فلزی، تَرک‌هایی در نمونه ایجاد می‌­شوند.}, keywords_fa = {غلاف سوخت,تُردی هیدروژنی,هیدرید زیرکونیم,شارژ الکتروشیمیایی هیدروژن}, url = {https://jonsat.nstri.ir/article_115.html}, eprint = {https://jonsat.nstri.ir/article_115_e2a2643b1de26adf1d6e0774b0efffb0.pdf} } @article { author = {Mokhles Gerami, F and Kakuee, A. R and Mohammadi, S}, title = {Characterization of Anodic Porous Alumina by Ion Beam Analysis Method}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {37}, number = {2}, pages = {46-56}, year = {2016}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Porous aluminum oxide due to its unique properties has a wide range of applications in technology.  The quality of porous layer, its thickness as well as the size and density of pores, have crucial rule in the performance of this advanced material. Direct and nondestructive measurement of specifications of the porous layer is among the challenges facing the researchers in controlling its fabrication process and improvement of its performance.  In this research work, we have tried to employ the capabilities of ion beam analysis techniques to determine certain characteristics of the porous aluminum oxide layer. For this purpose, the techniques of elastic backscattering spectroscopy (EBS), elastic recoil detection (ERD) analysis, and nuclear reaction analysis (NRA) have been employed for characterization of porous alumina and its comparison with nonporous alumina. Using the EBS technique, elemental composition, impurities and depth profiles of elements in the sample are measured. By the NRA technique, oxygen and carbon concentrations in the sample are determined; and by using the ERD technique, the depth profile of the existing hydrogen in the sample is measured. Moreover, by employing the resonant ion beam scattering analysis of 16O(α ,α)16O, structural analysis of the porosity is investigated.}, keywords = {Porous Aluminum Oxide,Ion Beam Analysis,Porosity,Resonance Reaction,Depth Profile}, title_fa = {مشخصه‌یابی آلومینای متخلخل آندی به روش آنالیز با باریکه‌ی یونی}, abstract_fa = { اکسیدآلومینیم متخلخل به دلیل خواص یگانه­‌ی خود، کاربرد گسترده­ای در فن­‌آوری دارد. کیفیت لایه‌­ی متخلخل، ضخامت این لایه، چگالی و اندازه­‌ی خُلل‌ها، نقش تعیین­‌کننده­ای در عملکرد این ماده‌­ی پیشرفته دارند. اندازه‌گیری مستقیم و غیرمخرب ویژگی­‌های لایه‌­ی‌ متخلخل به منظور کنترل فرایند ساخت و بهبود عملکرد آن، از چالش‌های پیش‌روی پژوهش‌گران است. در این پژوهش، سعی شده است تا با استفاده از توانمندی آنالیز به وسیله­‌ی باریکه‌­ی یونی، برخی از مشخصات اکسید آلومینیم متخلخل تعیین شود. به این منظور از روش‌های پس­‌پراکندگی کشسانی (EBS)، آشکارسازی ذرات پس زده از برخورد کشسان (ERD) و برهم‌کنش هسته‌ای (NRA) برای مشخصه‌یابی آلومینای متخلخل و مقایسه­‌ی آن با نمونه­‌ی آلومینای غیرمتخلخل استفاده شده است. با استفاده از روش EBS ترکیب­های عنصری، ناخالصی‌ها و نمایه­ی عمقی عناصر؛ با استفاده از روش NRA غلظت عناصر اکسیژن و کربن در نمونه؛ و با روش ERD نمایه‌­ی عمقی هیدروژن موجود در نمونه‌ها، اندازه‌گیری شده است. علاوه ‌بر این، با استفاده از روش آنالیز پس­‌پراکندگی باریکه‌­ی یونی تشدیدی  16O(α ,α)16O، تحلیل ساختاری تخلخل بررسی شده است.}, keywords_fa = {اکسیدآلومینیم متخلخل,آنالیز با باریکه‌ی یونی,میزان تخلخل,برهم کنش تشدیدی,نمایه‌ی عمقی}, url = {https://jonsat.nstri.ir/article_116.html}, eprint = {https://jonsat.nstri.ir/article_116_31c0b2dc6aff544497770d3651b4015d.pdf} } @article { author = {Farahbod, A.H and Ghani-Moghadam, G}, title = {Investigation of Soft X-Ray Laser with Plasma Active Medium and Self-Filtering Unstable Resonator}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {37}, number = {2}, pages = {57-67}, year = {2016}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {This paper proposes that self-filtering unstable resonator (SFUR) is suitable to be used in soft x-ray lasers possessing an active medium with a short-gain-lifetime. For this purpose, a self-filtering unstable resonator (SFUR), in one and two dimensions with Ne-like Fe soft x-ray active medium at 25.5 nm and maximum gain 124 cm-1, has been theoretically investigated to obtain a low beam divergence of ~ 0.5 mrad. The role of the field-limiting aperture in mode propagation has also been shown. In addition, the beam quality factor M2 has been calculated and the output mode behavior has been investigated and compared with a plane-parallel (PP) resonator of equal length. The calculations indicate that the M2 factor in SFUR resonator is smaller than the PP resonator and therefore the output beam divergence is lower and the mode quality is much better resulting in a higher beam spatial coherency.}, keywords = {Self-Filtering Unstable Resonator (SFUR),Soft X-Ray Laser (SXRL),Mode Quality,Spatial Coherency}, title_fa = {بررسی لیزر پرتو ایکس نرم با محیط فعال پلاسما و تشدیدگر ناپایدار خود پالاینده}, abstract_fa = {برای دست‌یابی به کیفیت بالای لیزرهای پرتو ایکس نرم که طول عمر محیط بهره‌ی پلاسمایی آن‌ها کوتاه است، استفاده از تشدیدگرهای ناپایدار خودپالاینده (SFUR)، مناسب به نظر می‌رسد. در این پژوهش به بررسی نظری تشدیدگر ناپایدار خودپالاینده (SFUR) در یک و دو بُعد برای لیزر پرتو ایکس نرم شبه نئون آهن با طول موج nm 25.5 و بیشینه بهره‌ی 1-cm 124پرداخته شده است که واگرایی کوچک (mrad 0.5~) باریکه‌ی لیزر را به همراه دارد. هم‌چنین تأثیر اندازه‌ی روزنه‌ی محدودکننده‌ی میدان در انتشار مد خروجی و کیفیت پرتو خروجی با استفاده از ضریب M2 بررسی شده است. این تشدیدگر در مقایسه با تشدیدگر صفحه موازی با طول معادل، از ضریب کیفیت کوچک‌‌تر و باریکه‌ی خروجی با واگرایی کم‌تر و کیفیت مُد بسیار بهتری برخوردار است و می‌تواند سبب افزایش همدوسی فضایی باریکه­‌ی لیزر شود.}, keywords_fa = {تشدیدگر ناپایدار خود پالاینده,لیزر پرتو ایکس نرم,کیفیت مُد,همدوسی فضایی}, url = {https://jonsat.nstri.ir/article_117.html}, eprint = {https://jonsat.nstri.ir/article_117_1aa9a4add431760f03e8699fa05a7091.pdf} } @article { author = {Pishdast, M and Eslami Majd, A and Kavosh Tehrani, M}, title = {Impact of Ambient Gases on the Plasma Radiation and its Expansion in Laser-Copper Interaction}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {37}, number = {2}, pages = {68-78}, year = {2016}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this paper, the impacts of air, argon, helium and neon ambient gases under different gas pressures on radiations, emphasizing in the signal to radiation background and the expansion of laser induced plasma from laser metal interaction have been experimentally studied using spectroscopy, probe beam absorption, and scattering methods. The results show that the plasma radiations and its expansion behavior depend strongly on the ambient gas presure. The highest intensity of the copper spectral lines occurred in argon, neon, air, and helium, respectively. For all gases, by increasing the gas pressure from 5 to 100 mbar the plasma spectral radiation increases and then it saturates at the higher gas pressure. The continuum radiation also increases with the pressure and has the highest value for Ar, air, Ne and He gases, respectively. Plasma in He, Ne, air and Ar has the best singnal to backgrourd (S/B) ratio, respectively, and decreases with the pressure. The probe beam absorption and scattering results have also been compared with the Sedov-Taylor strong shock wave model. The maximum speed of the plasma plume expansion, occurred near the target surface under 750 mbar gas pressure, and was determined for helium to be about 25200 m/s, and through neon, air and argon gases, amounted to about 15625, 13900 and 11860 m/s, respectively, as they reduced significantly when they were far from the target surface and reached 2550, 1000, 700 and 690 m/s at 6 mm from the target for helium, neon, air and argon, respectively.}, keywords = {: Laser produced plasma,Ambient gas,Probe beam absorption and scattering,LIBS}, title_fa = {اثر گازهای پیرامونی بر تابش پلاسما و گسترش آن در برهم کنش لیزر با مس}, abstract_fa = {در این پژوهش اثر گازهای پیرامونی هوا، آرگون، هلیم و نئون در فشارهای مختلف بر تابش و گسترش پلاسمای حاصل از برهم­کنش باریکه­‌ی لیزر با هدف فلزی، با تأکید بر بهینه‌­سازی نسبت سیگنال به تابش پیوستار به روش بیناب‌­نمایی فروشکست القایی لیزری و جذب و پراکندگی پرتو کاوش بررسی شده است. نتایج نشان می­‌دهند که تابش‌­ها و گسترش پلاسما به نحو قابل­‌توجهی به نوع و فشار گاز پیرامون وابسته است. بیش­ترین شدت خطوط نشری اتم مس به ترتیب برای گازهای آرگون، نئون، هوا و هلیم به دست آمده است. برای تمام گازها با افزایش فشار گاز پیرامون از 5 تا mbar100، شدت تابش طیفی پلاسما افزایش می­‌یابد و سپس با بیش­تر شدن فشار تا یک اتمسفر اشباع می‌­شود. تابش پیوستار پلاسما نیز با افزایش فشار، روندی افزایشی دارد و به ترتیب برای گازهای آرگون، هوا، نئون و هلیم بیش­ترین مقدار را دارد. نسبت تابش طیفی به پیوستار زمینه به ترتیب برای گازهای هلیم، نئون، هوا و آرگون بیشینه است و برای تمام گازها با افزایش فشار کاهش می‌­یابد. نتایج حاصل از گسترش پلاسما به روش جذب و پراکندگی پرتو کاوش با نظریه سدف- تیلور مقایسه شد. سرعت گسترش پلاسما در نزدیکی سطح هدف در حضور گاز هلیم در فشار mbar750 برابر با m/s25200 و در حضور گازهای نئون، هوا و آرگون به ترتیب 15625، 13900 و m/s 11860 به دست آمد که با دور شدن از سطح به شدت اُفت کرده و در فاصله 6mm از سطح برای گازهای هلیم، نئون، هوا و آرگون به ترتیب به 2550، 1000، 700 و m/s690 می‌­رسد.}, keywords_fa = {پلاسمای لیزری,گاز پیرامونی,جذب و پراکندگی پرتو کاوش,بیناب نمایی فروشکست القایی لیزری}, url = {https://jonsat.nstri.ir/article_118.html}, eprint = {https://jonsat.nstri.ir/article_118_1872347005b146ca754ca114a25d75ba.pdf} } @article { author = {Fotokian, M. H and Madani, Z}, title = {Effects of Different Doses of Gamma Rays on Seed Germination Characteristics of Balango Shirazi (Lallemantia Royleana)}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {37}, number = {2}, pages = {79-87}, year = {2016}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Balango (Lallemantia royleana), as a medicinal plant, contains a significant amount of effective ingredients. Balango seed has several properties: it is anti-bloating, constipation, dry cough, and asthma to name only a few. With regard to the importance of genetic diversity in plant breeding, induced mutation has been used for diversification. This study was conducted to evaluate the effect of gamma rays  doses  (0, 50, 100, 150, 250, 350, 450, 550, 700, and 900 Gy)  on traits related to grains of Balango Shirazi, and also to determine the suitable dose of gamma rays for induced mutation through completely randomized design with four replications. On the basis of variance analysis results, the differences among gamma rays doses were statistically significant for traits such as shoot dry weight, root fresh weight, mean germination time, germination rate, germination variances, germination homogeneity, root length and shoot length. The correlation of germination percentage with traits included germination rate, germination variance, root fresh weight, shoot dry weight. The shoot dry weight was positively significant at 1% probability level. Meanwhile, the correlation of germination percentage with shoot length and root length was not significant. As a conclution, gamma dose of 250 Gy was chosen as a suitable dose in mutation breeding experiment of Balango.}, keywords = {Balango,Gamma Ray,Germination Characteristics}, title_fa = {تأثیر دزهای مختلف اشعه ی گاما بر ویژگی‌های جوانه زنی بذر گیاه دارویی بالنگوی شیرازی}, abstract_fa = {گیاه دارویی بالنگو (Lallemantia royleana) دارای مواد مؤثر فراوانی است. بذر بالنگو دارای فواید گوناگونی از جمله ضد نفخ، یبوست، سرفه­‌ی خشک و آسم است. با توجه به اهمیت تنوع ژنتیکی در اصلاح نباتات، از جهش مصنوعی برای ایجاد تنوع می‌­توان استفاده کرد. این پژوهش به منظور بررسی آثار دزهای مختلف اشعه‌ی گاما (°، 50، 100، 150، 250، 350، 450، 550، 700، Gy900) بر ویژگی‌­های بذر بالنگوی شیرازی و تعیین دز مناسب پرتو­ گاما برای ایجاد جهش از طریق طرح کاملاً تصادفی با 4 تکرار اجرا شد. نتایج حاصل از این آزمایش نشان داد که بین دزهای اشعه­‌ی گاما، اختلاف معنی­‌داری از نظر وزن خشک ساقه‌­چه، وزن تر ریشه­‌چه، طول ریشه‌­چه و ساقه­‌چه و نیز پارامترهای جوانه­‌زنی شامل مدت زمان، ضریب، سرعت، واریانس و همگنی آن وجود دارد. درصد جوانه‌­زنی با صفاتی مانند سرعت و واریانس جوانه‌­زنی، وزن تر ساقه­‌چه، وزن خشک ساقه­‌چه و ریشه‌­چه، در سطح احتمال 1% همبستگی مثبت و معنی­‌دار داشت، ولی با طول ساقه‌­چه و طول ریشه­‌چه همبستگی نداشت. هم­چنین دز 250Gy برای ایجاد جهش در بالنگوی شیرازی مناسب تشخیص داده شد.}, keywords_fa = {بالنگو,پرتو گاما,ویژگی های جوانه زنی}, url = {https://jonsat.nstri.ir/article_119.html}, eprint = {https://jonsat.nstri.ir/article_119_19fa9d5ae8c86b4da14807823b5f147b.pdf} } @article { author = {Tabasi, M and Yaghoubi, Y and Outokesh, M and Torab- Mostaedi, M}, title = {Measurement of Axial Dispersion Coefficient of the Continuous Phase in a Pulsed Disc and Doughnut Column Using Dispersion Model with Radiotracer Technique}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {37}, number = {2}, pages = {88-95}, year = {2016}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {High efficiency and low required area for the pulsed columns are interesting and useful especially in nuclear industries in spite of exposure and radiation protection requirements. In this research, dispersion coefficient in a typical disc and doughnut pulsed column in a two phase system (water and kerosene) was determined via radiotracer technique. In the radiotracer method, two Geiger-Mueller detectors at the top and bottom of the active section of the pulsed column and 99mTc in the form of NaTcO4 as radiotracer are used. Dispersion is introduced by Pecletdimensionless number which is inversely propotional to the dispersion coefficient. The continuous and dispersed phase flow rate, amplitude and frequency of pulse as the effective parameters on axial mixing and dispersion coefficient magnitude have been studied. Experimental results indicate that by increasing the continuous phase flow rate, the dispersion coefficient decreases. Also, by increasing the dispersion phase flow rate as well as the amplitude and frequency of the pulse, the dispersion coefficient will increase.}, keywords = {Pulsed Disc and Doughnut Columns,Radiotracer,Axial Dispersion}, title_fa = {اندازه گیری ضریب پراکندگی محوری فاز پیوسته در ستون استخراج ضربه‌ای دیسک و دونات با استفاده از مدل پراکندگی با ردیاب پرتوزا}, abstract_fa = {کارایی بالا و فضای کم مورد نیاز برای ستون‌های ضربه‌ای، باعث شده است که با وجود احتمال پرتودهی و نیاز به حفاظت در برابر اشعه، به ویژه در صنایع هسته‌­ای مورد توجه و استفاده قرار گیرند. در این پژوهش، ضریب پراکندگی محوری فاز پیوسته در یک ستون استخراج ضربه‌ای دیسک و دونات برای سیستم آب- نفت بی‌بو با استفاده از روش ردیاب پرتوزا اندازه‌گیری شده است. پراکندگی که توسط پارامتر بدون بُعد عدد پکلت مشخص می‌شود، با عکس ضریب پراکندگی متناسب است. در روش ردیاب پرتوزا از دو آشکارساز گایگر- مولر در بالا و پایین ناحیه‌­ی فعال ستون و نیز از ردیاب پرتوزای 99mTc به ترکیب شیمیایی NaTcO4 استفاده می‌­شود. عوامل مؤثر بر اختلاط محوری و ضریب پراکندگی شامل تغییرات دبی فازهای پیوسته و پراکنده، دامنه و بسامد ضربه مطالعه شدند. نتایج و مشاهدات تجربی نشان می‌دهد با افزایش دبی فاز پیوسته، ضریب پراکندگی محوری فاز پیوسته کاهش می‌یابد. هم­چنین با افزایش دبی فاز پراکنده، دامنه و بسامد ضربه، ضریب پراکندگی فاز پیوسته افزایش می­‌یابند.}, keywords_fa = {ستون های ضربه ای دیسک و دونات,ردیاب پرتوزا,پراکندگی محوری}, url = {https://jonsat.nstri.ir/article_120.html}, eprint = {https://jonsat.nstri.ir/article_120_e55d065571257a8e9e48061c4b12afee.pdf} }