@article { author = {Yahaghi, E and Movafeghi, A and Ahmadi, Sh and Rokrok, B and Mohammadzadeh, N and Rastkhah, N}, title = {Lorestan Bronze Plate Design Identification by Nondestructive Radiography Method and Image Processing by Means of Histogram Matching}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {33}, number = {4}, pages = {1-8}, year = {2013}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Radiography is known as one of the oldest and most widely used nondestructive testing (NDT) techniques, where it introduces the most appreciated technique by producing images which are acting as unique fingerprint records of samples of interest. Among the interesting applications of radiography are archeological and art applications. In this research, radiography was implemented for identification of a damaged art-historical material. The sample was a brass plate belonging to Iran cultural heritage. The estimated age of the plate was about 3500 years. The plate was discovered in Lorestan province, where it is generally called “Lorestan bronze”. The plate was damaged seriously due to serious corrosion enviromental attacks, and recognition of the sample was considered as the major problem. The simple radiography method was quite helpful for the plate determination but the method  suffered from some major drawbacks due to contrast and thickness measurements. The thickness measurement and corrosion/erosion evaluation were the vital components of the inspection. The image processing techniques and precise thickness measurement method were added to the digitized radiographs. For the digital image processing, a histogram matching algorithm and an edge detection method were used. After all, the resulted image showed an enhanced quality image of the original traces of the hammered design. The results showed that a good experimental setup of radiography along with the image processing technique can give a high quality radiographic image which is able to be used effectively for the identification of art antiques. The human evaluation results also confirmed the ability of the proposed method with a high degree of certainty.}, keywords = {Lorestan Bronze,Radiography,Image processing,Histogram Matching}, title_fa = {بازیابی و تشخیص نقوش بشقاب مفرغی عتیقه‌ی لرستان با استفاده از آزمون رادیوگرافی و پردازش تصویر به روش تطبیق بافت‌نگار}, abstract_fa = {آثار هنری از مهم­ترین گنجینه‌های هر کشوری به حساب می‌آیند. بسیاری از این آثار با گذشت زمان بر اثر مواردی مانند خوردگی، فرسایش و حوادث مختلف طرح اصلی خود را از دست می‌دهند. بررسی فرایند خوردگی و ساییدگی نیازمند ابزار‌های آشکارسازی قابل اعتمادی است که میزان تخریب در هر قسمت از قطعه را مشخص کند. در این مقاله از روش اندازه‌گیری عمق خوردگی در تصاویر رادیوگرافی برای مشخص کردن طرح یک بشقاب مفرغی طرح‌دار عتیقه‌ از گنجینه‌های لرستان، استفاده شده است. با استفاده از این روش، میزان خوردگی و ساییدگی اثر مشخص و نقوش بشقاب عتیقه که بر اثر مرور زمان دستخوش آسیب شده بود، باز‌سازی شده است. استفاده از روش بازسازی عمق و روش لبه‌یابی همراه با تطبیق بافت­نگار، تصاویر واضحی از نقوش این بشقاب را نشان داد که در تصویر رادیوگرافی اولیه مشخص نبودند. این، نشان می‌دهد که ترکیب رادیوگرافی و تطبیق بافت‌­نگار در روش‌های پردازش تصویر بر مبنای مشخصات فیلم و روش پرتونگاری با در نظر گرفتن اصول فیزیکی حاکم بر رادیوگرافی، می‌تواند نتایج بسیار مطلوبی را در شناسایی آثار باستانی و کاربردهای مشابه ارایه دهد. نتایج حاصل از ارزیابی انسانی، بهبود کیفیت تصاویر را با درصد اطمینان بالایی تأیید کرد.}, keywords_fa = {‌مفرغ لرستان,رادیوگرافی,پردازش تصویر,تطبیق بافت‌نگار}, url = {https://jonsat.nstri.ir/article_360.html}, eprint = {https://jonsat.nstri.ir/article_360_acb4d00c6eab2cb1767a0eaca99d3d94.pdf} } @article { author = {Davarpanah, M. R and Kalantari, B. Aziz and Nickzad, R and Ghannadi Maragheh, M}, title = {Production of 188-Re Sulphide Colloid for Knee Joints Arthritis Treatment and Acidity, Molar Ratio and Ultrasonic Time Optimization}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {33}, number = {4}, pages = {9-13}, year = {2013}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this study, 188-Re sulphide colloid was synthesized as a radiosynovectomy agent by reduction of sodium thiosulfate in the presence of perrhenate. The influences of the acidity, molar ratio and ultrasonic time on the colloid properties were investigated from 0.1 to 5 mol L-1; 5 to 70; and 10 to 60 min, respectively. The criteria for optimization of the influencing factors were the particle size and radiolabeling yield. Based on these factors the selected conditions were 1M HCl, thiosulfate to perrhenate molar ratio of 35 and 45 min for the ultrasonic time. The sizes of the particles were in the range of 1 to 5mm for more than 95% of the particles. The radionuclidic and radiochemical purity were found to be more than 99%. In addition, the synthesized colloid was stable for 5 days.  }, keywords = {Rhenium Sulphide Colloid,Radiosynovectomy,Radiolabelling Yield,Radiochemical Purity}, title_fa = {تولید کلویید رنیم- 188 سولفید برای درمان آرتریت روماتیسمی مفاصل زانو و بهینه‌سازی عوامل قدرت اسیدی، نسبت مولی و زمان فراآوایی}, abstract_fa = {ابتدا کلویید رنیم188-سولفید به عنوان یک عامل رادیوسینووکتومی با استفاده از روش کاهش اسیدی تیوسولفات در حضور پررنات تهیه و سپس تأثیر 3 عامل قدرت اسیدی، نسبت مولی و زمان فراآوایی بر روی خواص کلویید بررسی شد. برای بررسی این عامل‌­ها از غلظت­‌های مختلف هیدروکلریک اسید در محدوده­‌ی 0.1  تا 5 مول بر لیتر، نسبت­‌های مولی مختلف تیوسولفات به پررنات پتاسیم در گستره­‌ی 5 تا 70 و بازه­­‌های زمانی 10 تا 60 دقیقه برای فراآوایی استفاده شد. غلظت 1 مول بر لیتر هیدروکلریک اسید، نسبت مولی 35 و زمان فراآوایی 45 دقیقه براساس اندازه­‌ی ذرات کلویید و بازده نشان­دارسازی انتخاب شدند. آزمایش‌­های کنترل کیفی نشان‌­دهنده­‌ی خلوص رادیوشیمیایی و رادیو- نوکلییدی بالاتر از 99%. بود. بیش از 95%ذرات کلویید در محدوده­‌ی 1 تا mm5  قرار داشتند. کلویید سنتز شده تا 5 روز پایدار بود.}, keywords_fa = {کلویید رنیم سولفید,رادیوسینووکتومی,بازده نشان‌دارسازی,خلوص رادیوشیمیایی}, url = {https://jonsat.nstri.ir/article_361.html}, eprint = {https://jonsat.nstri.ir/article_361_a52156be19d2457dfa09cc5262a14c52.pdf} } @article { author = {Zokaei Kadijani, S and Safdari, S. J and Mousavian, S. M. A and Rashidi, A}, title = {Study of Oxygen Mass Transfer Coefficient in Microbial Leaching of Uranium}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {33}, number = {4}, pages = {14-21}, year = {2013}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Oxygen mass transfer coefficient is one of the most important parameters in the design of aerobic process bioreactor, which is represented by the overall volumetric oxygen mass transfer. The purpose of this article was the investigation of the mass transfer coefficient in the vast range of operational parameters in a stirred tank reactor. The effects of cell concentration, stirred power consumption and apparent air velocity on the mass transfer coefficient show that oxygen mass transfer in microbial leaching of uranium and in this range of parameter is not limited in these experiments. The overall volumetric oxygen mass transfer was determined in the range of 36-84 hr-1. Agreements of the suggested mathematical correlation for predicting the mass transfer were also evaluated. The results showed that the equation based on the rpm and/or power consumption and apparent air velocity specifies a good agreement with the experimental results with the coefficient of determination of R2=94.2 and 93.4. It was concluded that the introduced models are suitable for evaluation of the mass transfer coefficient in the microbial leaching of uranium.}, keywords = {Mass Transfer Coefficient,Oxygen,Microbial Leaching,Uranium,Stirred Bioreactor}, title_fa = {ضریب انتقال جرم اکسیژن در فرایند فروشویی میکروبی اورانیم}, abstract_fa = { از آن جا که ضریب انتقال جرم حجمی کل یکی از پارامترهای مهم در طراحی زیست رآکتور فرایند هوازی همراه با هم­زن مکانیکی است، در این مقاله ضریب انتقال جرم اکسیژن در محدوده­ی وسیعی از متغیرهای عملیاتی مورد بررسی قرار گرفت. متغیرهای عملیاتی مورد مطالعه در این تحقیق غلظت سلولی باکتری، توان مصرفی هم­زن و سرعت ظاهری جریان هوا بودند. نتایج تجربی به دست آمده نشان داد که اثر توان مصرفی هم­زن بیش­تر از سرعت ظاهری جریان هوا و اثر این آخری بیش­تر از غلظت سلولی باکتری است. محدوده­ی ضریب انتقال جرم حجمی کل اکسیژن در این آزمایش­‌ها، 36-84 hr-1  محاسبه شد. مقادیر به دست آمده برای ضریب انتقال جرم هم­چنین نشان داد که انتقال جرم اکسیژن در فرایند فروشویی میکروبی اورانیم از پارامترهای محدودکننده نیست. تطابق مدل­‌های ریاضی پیشنهادی برحسب پارامترهای عملیاتی برای ضریب انتقال جرم با نتایج تجربی نشان داد که معادلات ارایه شده برحسب دور هم­زن یا توان مصرفی و سرعت ظاهری جریان هوا از سازگاری نسبتاً خوبی برخوردار هستند و ضریب هم­بستگی R2 آن‌­ها برابر 94.2 و 93.4 تعیین شد. لذا، این مدل برای پیش­بینی ضریب انتقال جرم در فرایند فروشویی میکروبی اورانیم می­‌تواند استفاده شود.}, keywords_fa = {: ضریب انتقال جرم,اکسیژن,فروشویی میکروبی,اورانیم,زیست رآکتور هم‌زن‌دار}, url = {https://jonsat.nstri.ir/article_363.html}, eprint = {https://jonsat.nstri.ir/article_363_7b021eb4a25cbecba9f0b1b7e065e79c.pdf} } @article { author = {Hadadi, Z and Khorramian, A}, title = {The Role of Target Mass Corrections in the Polarized Spin Structure Functions of Neutron and Deuteron}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {33}, number = {4}, pages = {22-27}, year = {2013}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Lepton scattering of nucleon targets (DIS experiment) plays an essential role in the investigation of proton as a composite particle which consists of quarks and gluons. With the recent advances made in the precision of inclusive lepton-nuclear scattering experiments, it has become apparent that comparable improvements are needed in the accuracy of the theoretical analysis tools. In particular, when extracting parton distribution functions in the large-x region, it is crucial to correct the data by the effects associated with the non-zero mass of the target. In this paper, we present the effect of target mass corrections (TMCs) on the neutron and deuteron spin structure functions in the NLO QCD approximation.}, keywords = {Target Mass Corrections,Polarized Structure Functions,Neutron,Deuteron}, title_fa = {نقش تصحیحات جرم هدف در توابع ساختار قطبیده‌ی اسپینی نوترون و دوترون}, abstract_fa = {پراکندگی الکترون‌ها از هدف‌های هادرونی نقش مهمی در فهم ما از پروتون به عنوان یک ذرّه‌ی مرکب ساخته شده از پارتون، بازی می‌کند. با افزایش دقت آزمایش‌های پراکندگی ناکشسان ژرف، پیشرفت‌های قابل مقایسه در دقت ابزارهای نظری امری مسلم است، به خصوص برای استخراج توابع توزیع پارتونی در ناحیه‌ی x بزرگ، تصحیح داده‌ها به وسیله‌ی اثرات مرتبط با تصحیحات جرم غیرصفر هدف، ضروری به نظر می­رسد. در این مقاله اثرهای مرتبط با تصحیحات جرم هدف بر روی توابع ساختار اسپینی g1 و g2 مربوط به نوترون و دوترون در تقریب مرتبه‌ی دوم مورد بررسی قرار گرفته است.}, keywords_fa = {تصحیحات جرم هدف,توابع ساختار قطبیده,نوترون,دوترون}, url = {https://jonsat.nstri.ir/article_364.html}, eprint = {https://jonsat.nstri.ir/article_364_44047c676e780e1d2f31786677df47e4.pdf} } @article { author = {Banari Bahnamiri, Sh and Miri Hakimabad, S. H and Izadi Najafabadi, R}, title = {Estimated Dose of Electrons Emitted from Radon-222 Progenies Applying Variance Reduction Methods in ORNL Phantom}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {33}, number = {4}, pages = {28-36}, year = {2013}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Radon is the main source of radioactivity in the environment. Scientific investigations revealed that after the smoking, radon ranked as the second cause of lung cancer. Despite the short half life of Radon-222, it is produced continuously in nature, as its main source is the decay of uranium-238 with the half life time of 4.5×109 years. Radon exists in air, mines, oil, natural gas, building materials and groundwater; therefore it may easily enter the lung through the inspiratory system and emits alpha, beta, gamma, X-ray and conversion electron. These particles and radiations which can deposit their energies in different organs are considered to be very harmful for the human health. Although, many houses have been built on a bed of granite rock, the exact assessment for the amount of radon in the residential houses has not yet been carried out. In this regard, a serious analysis is needed to be made in this field, in particular, for calculation of different organs' absorbed dose of Radon and its progenies. In this study, Monte Carlo calculations have been made using MCNPX2.4.0 code and the variance reduction methods were applied for the calculations of the absorbed dose due to beta particle and the conversion electron from decay of Radon and its progenies. An effective dose rate of 5.93 µSvWLM-1 in this respect has been evaluated for the human body.}, keywords = {222-Radon Progeny,Variance Raduction Method,ORNL Phantom,Dose of Electrons}, title_fa = {برآورد دز جذبی الکترون گسیلیده از دختران رادون 222- با به کارگیری روش‌های کاهش واریانس در فانتوم ORNL}, abstract_fa = {بخش عمده­ای از پرتوگیری بشر از محیط زندگی ناشی از گاز رادون است. مطالعات نشان داده که رادون دومین علت ابتلا به سرطان ریه بعد از سیگار است. منبع اصلی رادون-222، اورانیم-238 (با نیم- عمر 4.5×109 سال) است و به همین دلیل تولید آن در طبیعت با وجود نیم- عمر کوتاهش استمرار دارد. رادون در خاک، هوا، معادن، آب­‌های زیرزمینی، نفت، گاز طبیعی و مصالح ساختمانی وجود دارد که از راه استنشاق وارد مجاری سیستم تنفسی انسان می­شود. بررسی­‌ها نشان داده است با وجود این­که بسیاری از خانه‌­های مناطق کشور ما ایران بر روی بسترهایی از سنگ­‌های گرانیت احداث شده­ است، پژوهش و بررسی­‌های جدی در این زمینه انجام نشده است. لذا انجام محاسبات دقیق دز جذبی ناشی از تابش دختران رادون در عضوهای بدن انسان به منظور برآورد خطر، ضروری به نظر می‌­رسد. در این مقاله محاسبات دزیمتری عضوهای بدن برای تابش بتا و الکترون تبدیل داخلی گسیلیده از رادون- 222و دخترانش به روش مونت­کارلو، با استفاده از کد محاسباتی MCNPX2.4.0 و فانتوم تصحیح شده­‌ی انسان بالغ ORNL و با به کارگیری روش­‌های کاهش واریانس انجام شده و دز مؤثر تمام بدن برای این تابش­‌ها 5.93 µSvWLM-1  به دست آمد.}, keywords_fa = {دختران رادون-222,روش کاهش واریانس,فانتوم ORNL,دز جذبی الکترون}, url = {https://jonsat.nstri.ir/article_365.html}, eprint = {https://jonsat.nstri.ir/article_365_b27a6b8e10f36e640be05f6b2d6ffd2f.pdf} } @article { author = {Abtahi, S.M and Aghamiri, S.M. and Khalafi, H}, title = {Feasibility Study of Using PAGAT Polymer Gel Dosimeter for 3D Dosimetry Around the Reactor Core}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {33}, number = {4}, pages = {37-46}, year = {2013}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {An important problem for samples irradiation in research reactors is determination of three dimensional dose distributions in the vicinity of reactor core. Polymer gel dosimeters can be used to measure complex three dimensional dose distributions as well as the integrated dose accurately with no dependency on the dose rate. Furthermore, as they are tissue-equivalent, they may be used as a phantom. So far, polymer gel dosimeters have been used for photon, electron, proton, neutron and heavy ions, but there is a lack of application of polymer gel dosimeters for dosimetry of the mixed field of radiation of different linear ionization concentration. In this research, PAGAT polymer gel dosimeters are fabricated in the laboratory and then were irradiated with the mixed neutron gamma field from the fission process of the Tehran Research Reactor. The gel response was determined by the nuclear magnetic resonance imaging technique as a change in the relaxation rate (R2) of the gel dosimeters. The gel response as a function of normalized dose was investigated and a bi-exponential fitting was adjusted to the dose-R2 data. The region with a linear response, is called dynamic range. The slope of the region as the sensitivity of PAGAT gels to the normalized dose resulted from the neutron-gamma mixed field, was estimated to be 1.695 s-1. The results of this research showed that PAGAT polymer gel dosimeter is a useful tool for 3D dose distribution to determine the neutron gamma mixed field.}, keywords = {PAGAT Polymer Gel Dosimeter,Reactor Core,Neutron-Gamma Mixed Field,Dose Distribution}, title_fa = {بررسی امکان استفاده از دزیمتر ژل- پلی‌مر PAGAT برای تعیین توزیع سه‌بعدی دز در اطراف قلب رآکتور}, abstract_fa = {یکی از مهم­ترین مواردی که در پرتوده‌ی نمونه‌­ها برای مطالعات فعال­‌سازی یا غیر آن در رآکتورهای تحقیقاتی لازم است مدنظر قرار گیرد توزیع سه­‌بعدی دز در فضای اطراف قلب است. دزیمترهای ژل- پلی­مر علاوه بر امکان تعیین توزیع‌­های پیچیده­‌ی دز به صورت سه‌­بعدی دارای ترکیبی مشابه با بافت بدن بوده و خود به صورت یک فانتوم عمل می­‌کنند. تاکنون کم­تر به کاربرد دزیمتر ژلی برای تعیین توزیع دز در میدان­‌های مخلوط پرتوهای با چگالی خطی یونش مختلف توجه شده است. در این مطالعه دزیمتر ژل- پلی­مر PAGAT پس از تولید در آزمایشگاه، تحت تابش میدان مخلوط نوترون- گامای حاصل از شکافت در قلب رآکتور تحقیقاتی تهران، قرار گرفت و پاسخ ژل با استفاده از تصویربرداری تشدید مغناطیسی (MRI) به صورت تغییر در آهنگ بازگشت هسته­‌ها مورد بررسی قرار گرفت. پاسخ ژل نسبت به دز جذبی بهنجار شده بررسی شد و از برازش یک دونمایی به داده­‌های دز، R2به دست آمد. ناحیه­‌ای از پاسخ که در آن تغییرات R2برحسب دز بهنجار شده خطی بود به عنوان بازه­‌ی دینامیکی انتخاب شد و شیب به عنوان معیاری از حساسیت دزیمتر ژل- پلی­مر در میدان مخلوط نوترون- گاما در آن بازه به دست آمد. حساسیت دزیمتر به دز بهنجار شده­‌ی حاصل از طیف نوترون- گامای حاصل از شکافت برابر با 1.695 s-1 تقریب زده شد. نتایج به دست آمده نشان داد که دزیمتر ژل- پلی­مر PAGAT ابزار مناسبی برای تعیین توزیع دز در میدان مخلوط نوترون- گاما است.}, keywords_fa = {دزیمتر ژل- پلی‌مر PAGAT,قلب رآکتور,میدان مخلوط نوترون- گاما,توزیع دز}, url = {https://jonsat.nstri.ir/article_370.html}, eprint = {https://jonsat.nstri.ir/article_370_04fef6ab1e4b8e9eba4151be3f11b22f.pdf} } @article { author = {A. Milani, S and Hamidian, H and Rezai, B}, title = {Microbial Recovery of Uranium from Low Grade Ore Deposit of 5th Anomaly of Saghand}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {33}, number = {4}, pages = {47-58}, year = {2013}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Microbial leaching of uranium from Saghand low grade ore deposit by the acidiophilic mesophile acidithiobacillus ferrooxidants was investigated by changing the parameters such as pulp density, ferrous ions concentration as the resource of energy, initial pH of leaching solution and shaking speeds. The findings indicated that this strain is suitable for uranium recovery from the mentioned ore. About 60% of uranium could be recoverd in 50 hours by a pulp density of 2.5%(W/V). In the absence of microbial activity only about 5% of uranium was recoverd, and by the sulfuric acid leaching, only about 8.5% of uranium was extracted}, keywords = {Microbial Leaching,Acidithiobacillus Ferrooxidans,Low-Grade Ore Deposit,Saghand,Uranium}, title_fa = {بازیابی میکروبی اورانیم از کانسار عیار پایین آنومالی 5 ساغند}, abstract_fa = {فروشویی میکروبی اورانیم به وسیله‌­ی باکتری اسیدی تیوباسیلوس فرواکسیدان در مقیاس آزمایشگاهی از طریق تغییر پارامترهایی چون چگالی پالپ، غلظت یون فرو به عنوان منبع انرژی، pH اولیه­‌ی محیط فروشویی، سرعت هم­زنی بررسی شد. نتایج به دست آمده نشان داد که گونه­‌ی میکروبی به کار رفته برای بازیابی اورانیم از کانسنگ عیار پایین آنومالی 5 ساغند مناسب است. %60 اورانیم در مدت 50 ساعت و چگالی پالپ (W/V) 2.5%استخراج شد. بدون فعالیت میکروبی، تنها %5 اورانیم و از طریق فروشویی شیمیایی در محیط سولفوریک اسید، تنها 8.5% اورانیم بازیابی شد.}, keywords_fa = {فروشویی میکروبی,اسیدی تیوباسیلوس فرواکسیدان,کانسار عیار پایین,ساغند,اورانیم}, url = {https://jonsat.nstri.ir/article_371.html}, eprint = {https://jonsat.nstri.ir/article_371_eeb8a9f9dd6b2c066d7d1b2e49ce155b.pdf} } @article { author = {Khanchi, A.R. and Pourmatin, A and Akbari, N and Mojarabi, M.H. and Abhari, A}, title = {Investigation of the Adsorption Behavior of Strontium (II) and Yttrium (III) on the Impregnated XAD-4 Resin with HDEHP in Acidic Media}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {33}, number = {4}, pages = {59-65}, year = {2013}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Yttrium-90 as a β emitting with the maximum energy of 2.3MeV, and due to the long half-life of its parent-strontium-90, is considered as one of the most important radionuclides in nuclear medicine. In this context, a highly selective and rapid method for the separation of 90Y from its parent is required for its use in nuclear medicine. In this study, adsorption behavior of yttrium (III) and strontium (II) ions were studied on the Amberlite XAD-4 resin impregnated with (2-ethylhexyl) phosphate (HDEHP) by batch and continuous methods. The effects of extraction time in different media, nitric acid and hydrochloric acid concentrations on the sorption and desorption of ions were investigated. Different kinetic models were examined to determine the adsorption mechanism of yttrium. For the separation of yttrium from strontium in 0.05M nitric acid media, a solution containing 5ppm yttrium and 1000ppm strontium was passed with a flow rate of 1ml/min through a chromatography column. In this condition, while yttrium was retained by the resin, strontium passed through the column. A ratio of 200 was calculated for Y/Sr in eluate. The results of the present experiment can be used for separation of yttrium-90 from strontium-90.  }, keywords = {XAD-4 Resin,HDEHP,Yttrium,Strontium}, title_fa = {بررسی رفتار جذبی یون‌های ایتریم (III) و استرانسیم (II) بر روی رزین آمبرلیت XAD-4 آغشته به استخراج‌کننده‌ی HDEHP در محیط‌های اسیدی}, abstract_fa = {ایتریم- 90 به عنوان یک بتاگسیل با انرژی بیشینه­‌ی 2.3MeV  و به واسطه­ی عمر طولانی مادر- هسته‌­اش (استرانسیم- 90)، یکی از مهم­ترین رادیونوکلیدهای مورد استفاده در پزشکی هسته‌­ای است. استفاده از ایتریم به عنوان یک رادیودارو، مستلزم به کارگیری یک روش سریع و انتخابی برای جداسازی آن از مادر- هسته­‌اش است. در این مقاله، رفتار جذبی یون­‌های ایتریم (III) و استرانسیم (II) بر روی رزین XAD-4 آغشته به بیس (2-اتیل هگزیل) فسفات (HDEHP) در دو حالت پیوسته و ناپیوسته مورد بررسی قرار گرفته است. اثر زمان استخراج در محیط­‌های مختلف، و اثر غلظت نیتریک و هیدروکلریک اسید بر میزان جذب و واجذب این یون­‌ها بررسی شد. مدل­‌های مختلف سینتیکی نیز به منظور تعیین سازوکار جذب ایتریم مورد بررسی قرار گرفت. برای جداسازی ایتریم از استرانسیم در محیط نیتریک اسید M0.05، محلول شامل 5 میلی­گرم برلیتر ایتریم و 1000میلی­گرم بر لیتر استرانسیم با آهنگ ml/min1 از ستون کروماتوگرافی عبور داده شد. تحت این شرایط در حالی که ایتریم بر روی رزین نگه داشته شده بود، استرانسیم از ستون خارج و نسبت Y/Sr در محصول شویش برابر 200 محاسبه شد. از نتایج حاصل می­توان در جداسازی ایتریم- 90 از استرانسیم- 90 استفاده کرد.}, keywords_fa = {‌رزین آمبرلیت XAD-4,استخراج‌کننده‌ی HDEHP,ایتریم,استرانسیم}, url = {https://jonsat.nstri.ir/article_372.html}, eprint = {https://jonsat.nstri.ir/article_372_6fa6c0bef767b3f87b04060d256f9069.pdf} } @article { author = {Naghdi, R and Sheibani, Sh and Tamizifar, M}, title = {Fabrication of Miniature Titanium Capsule for Brachytherapy Sources Using Tungsten Inert Gas (TIG) Method}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {33}, number = {4}, pages = {66-71}, year = {2013}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {The capsules containing radioactive materials as brachytherapy sources are used for implanting into some target organs for malignant disorders treatments, such as prostate, eyes, and brain cancers. The conventional method for sealing the tubes is to weld them using a laser beam which is now a part of tube melting methods (self welding). The purpose of this study was to seal miniature titanium tubes containing radioactive materials in the form of capsules. This study introduced a new method based on melting process. A piece of commercially pure titanium grade 2 in the form of disk was used for the experiment. The sample was melted at the top of the tube by a TIG welding device for a short time duration. After complection of the melting, the disk in the form of a drop was mixed with a small part of it and both were solidified and hence closed the tube. We evaluated the tubes for the metalargical properties and seal process which took place by TIG in different zones, including the heat affected zone (HAZ), fusion zone (FZ), and interface (I) of the joint of the drop to the tube. Finally, the produced samples were tested according to the ISO2919 & ISO9978 and the results confirmed the Disk & TIG procedure.}, keywords = {Brachytherapy Source,TIG Welding,Titanium Capsule}, title_fa = {ساخت کپسول مینیاتوری تیتانیمی برای چشمه‌های براکی تراپی به روش جوشکاری قوسی تنگستن در محیط گازی بی‌اثر (تی‌آی‌جی TIG)}, abstract_fa = {کپسول­‌های محتوی مواد پرتوزا به عنوان چشمه­‌های براکی­تراپی در درمان سرطان­‌های پروستات، مغز و چشم از طریق کاشت در بدن کاربرد دارند. نشت‌­ناپذیر کردن این لوله­‌ها در حال حاضر به روش ذوب قسمتی از طول لوله (خود ذوبی لوله) از طریق جوشکاری (با تی­آی­جی، پرتوهای لیزر و یا الکترون) انجام می‌­شود. هدف این پژوهش نشت­‌ناپذیر کردن لوله‌­های مینیاتوری تیتانیمی به شکل کپسول حاوی مواد پرتوزا است. مقاله­‌ی حاضر روش جدیدی بر مبنای ذوب را معرفی می­‌کند. در این روش از یک قطعه تیتانیم خالص تجاری درجه 2 به شکل دیسک به عنوان لقمه استفاده می­‌شود. لقمه در انتهای لوله به وسیله­‌ی دستگاه جوشکاری (تی­آی­جی­) در یک زمان کوتاه ذوب می‌­شود. پس از ذوب کامل، لقمه به شکل یک قطره در دهانه‌­ی لوله، با قسمت کوچکی از آن درآمیخته و با هم منجمد شده و لوله را مسدود می­‌کند. خصوصیات فلزکاری و فرایند نشت­‌ناپذیر کردن لوله‌­ها به وسیله­‌ی لقمه و روش تی­آی­جی در نواحی مختلف از جمله ناحیه­‌ی حرارت دیده‌­ی لوله، منطقه­‌ی جوش و فصل مشترک اتصال قطره به لوله مورد بررسی قرار گرفتند. در نهایت نمونه­‌های تهیه شده آزمایش‌­های مربوط به استانداردهای ISO2919 و ISO9978 را با موفقیت پشت سر گذاشتند. نتایج به دست آمده، مطلوب و مناسب بودن روش لقمه- تی­آی­جی را تأیید نمود.}, keywords_fa = {چشمه‌ی براکی‌تراپی,جوشکاری تی‌آی‌جی,کپسول تیتانیمی}, url = {https://jonsat.nstri.ir/article_378.html}, eprint = {https://jonsat.nstri.ir/article_378_049a49f86c2652f479b95ff10560a1ea.pdf} } @article { author = {Rahimi, R.A and Hamidi, A and Naghavi, M}, title = {Bubble Removing from Lead Silicate Glass Melts}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {33}, number = {4}, pages = {72-79}, year = {2013}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In melting process of lead silicate glasses containing 70 wt% PbO, the bubble size distribution, and the manner of formation and elimination of gas bubbles of glass melt at different temperatures and times were investigated. The lead silicate glass was manufactured by melting, fritting and milling of glass powder for several stages. At first, 50 grams of lead silicate glass powder was poured into each alumina crucible for maintaining the batches separately at temperatures of 900, 950, 1000, 1050 and 1100˚C for 15, 30 and 45 minutes, to study the effects of time and temperature on the bubble nucleation, growth and ascension from the lead silicate glass melt. Because of the dissolution of air molecules inside the glass melt and owing to the achievement of super-saturation, gas bubbles were nucleated and grown. Due to the density of the gradient between the gas bubbles and glass melt, the bubbles ascended to the surface of the melt where they ruptured afterwards. The density of alumina crucibles and the glass inside them were measured. The volume and the mean value of the diameter of bubbles were determined by images from the lateral cross section of glass inside crucibles and from the images taken from the surface of the bubbly glassy layer on the surface of the samples.}, keywords = {Lead Silicate Glass Melt,Bubble Removing,Temperature Dependence,Time Dependence}, title_fa = {حباب‌زدایی از مذاب شیشه‌های سیلیکات سربی}, abstract_fa = {در عملیات ذوب شیشه­‌ی سیلیکات سربی حاوی 70% وزنی سرب اکسید، توزیع اندازه­‌ی حباب، نحوه­‌ی تشکیل و حذف آن در زمان و دماهای مختلف‌‍‌، مورد مطالعه قرار گرفت. تولید شیشه­‌های سربی از طریق ذوب، فریت و آسیاب کردن پودر شیشه طی چندین مرحله انجام گرفت. نمونه­‌های 50 گرمی از پودر شیشه­‌ی سیلیکات سربی، در درون بوته‌­های اکسید آلومینیمی در دماهای 900، 950، 1000، 1050 و C ْ1100 و در مدت زمان­‌های 15، 30 و 45 دقیقه تحت عملیات حرارتی قرار گرفتند. به دلیل وجود هوا و حل شدن آن در درون مذاب و نیل به حالت فوق اشباع، حباب­‌های گاز در درون مذاب تشکیل شدند. به دلیل اختلاف چگالی حباب‌­های گاز با مذاب شیشه، حباب­‌ها به بالای سطح مذاب نفوذ کرده و در آن­جا با ترکیدن لایه‌­ی شیشه‌­ای حباب، از مذاب خارج شدند. چگالی بوته‌­های اکسید آلومینیمی و شیشه­‌ی درون آن اندازه­‌گیری و از آن حجم (سانتی­متر مکعب) و اندازه‌­ی متوسط حباب­‌ها تعیین گردید. تصاویری از جدار جانبی شیشه­‌ی درون بوته، که نشان­گر شیشه­‌ی بدون حباب و لایه‌­ی حبابی است، و هم­چنین از سطح نمونه‌­ها برای برآورد اندازه­‌ی حباب­‌ها، تهیه گردید.}, keywords_fa = {مذاب شیشه‌ی سربی,حباب‌زدایی,وابستگی دمایی,وابستگی زمانی}, url = {https://jonsat.nstri.ir/article_379.html}, eprint = {https://jonsat.nstri.ir/article_379_30acef56be3b1d9431e27000e0a3ec52.pdf} }