@article { author = {Agha Aligol, D and Ketabdari, M.R and Oliaiy, P and Baghizadeh, A and Shokouhi, F and Lamehi Rachti, M and Farmahini Farahani, M and Moradi, M}, title = {Determination of Uranium Ores Composition Using Scanning Proton Microscope}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {29}, number = {3}, pages = {1-6}, year = {2008}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this paper, distribution of uranium and other elements with an accuracy of one micron has been investigated, using Scanning Proton Microscope. The correlation between the distribution of uranium and other elements is determined in the samples by the use of elemental distribution. Our results show, that minerals containing uranium are surrounded by minerals containing iron. Also, using Rutherford Backscattering Spectrometry, we were able to find the low-Z elements in the samples. Using this information, we can determine the chemical composition of the samples.  }, keywords = {PIXE Analysis,Scanning Proton Microscope,Uranium Ores,Elemental Distribution,Trace Elements}, title_fa = {شناسایی ترکیب کانی‌های اورانیوم با استفاده از میکروسکوپ روبشی پروتون}, abstract_fa = {در این مقاله توزیع عنصر اورانیوم و عناصر دیگر موجود در کانی‌های اورانیوم‌دار در مقیاس میکرونی با استفاده از میکروسکوپ روبشی پروتون (Micro-PIXE) بررسی شده است. با استفاده از توزیع عنصری بدست آمده برای عناصر موجود در کانی‌ها، همبستگی توزیع عنصر اورانیوم و عناصر دیگر موجود در نمونه‌ها مشخص شده است. این نتایج نشان می‌دهد که در این کانی‌ها، کانی‌های اورانیوم‌دار با کانی‌های آهن احاطه شده‌اند. همچنین با استفاده از ذرات برگشتی از نمونه (Micro-RBS)، عناصر سبک موجود در کانی‌ها به دست آمده است که با استفاده از آنها، می‌توان نوع ترکیبی عناصر موجود در نمونه را تعیین کرد.}, keywords_fa = {تجزیه پیکسی,میکروسکوپ روبشی پروتون,سنگ‌های معدن اورانیوم,توزیع عنصری,عناصر کم مقدار}, url = {https://jonsat.nstri.ir/article_529.html}, eprint = {https://jonsat.nstri.ir/article_529_2b2b15a480c0067a7444dcefe1d8d563.pdf} } @article { author = {Asgharizadeh, F and Salimi, B and Ghannadi Maragheh, M and Hojaghani, O}, title = {Age Determination of Fossil Shell Samples from Southern Shores of Iran Using Radiocarbon Dating}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {29}, number = {3}, pages = {7-11}, year = {2008}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this study, the method of radiocarbon dating was applied to determine the age of fossil shell samples, obtained from southern shores of Iran. The radiocarbon (14C) dating method has been applied in many fields, including oceanography, geology, and archaeology. In this method the sample is pretreated in physical and chemical procedures,then using a Benzene Synthesis System, benzene (C6H6) is synthesized from the sample. One gram of the synthesized benzene is added into a teflon counting vial containing 12ml scintillator Hisafe3. In order to count and determine the radioactivity concentration of beta particles emitted from radiocarbon, the liquid scintillation counting method is applied. The age determination of fossil samples has been carried out by using count per minute (cpm) values from beta counting of 14C in synthesized samples comparing to the obtained results from Oxalic Acid Modern Standard. For 8 shell samples studied, the determined ages are in the range of 210-3890 years, according to Before Present (BP; before 1950). The efficiency of Liquid Scintillation Counting system for 14C is calculated to be about 92% and the calculation error for the low age samples was ±40 years and for the high age samples was ±100 years, respectively.}, keywords = {Radiocarbon Dating,Liquid Scintillation Counting,Archaeological Specimens,Carbon-14,Benzene}, title_fa = {تعیین سن نمونه‌های صدف سواحل جنوبی ایران به روش سالیابی با رادیو‌کربن}, abstract_fa = {در این تحقیق جهت تعیین سن صدف‌های فسیلی بدست آمده از مناطق سواحل جنوبی ایران روش سالیابی با رادیوکربن مورد استفاده قرار گرفته است. بطور کلی سالیابی با رادیوکربن در بسیاری از رشته‌ها مانند باستان‌شناسی، زمین‌شناسی و اقیانوس‌شناسی کاربرد وسیعی دارد. در این روش پس از انجام مراحل اولیه فیزیکی و شیمیایی بر روی نمونه‌ها با استفاده از دستگاه سنتز بنزن، کربن به بنزن سنتز شد. بنزن سنتز شده حداقل به میزان یک گرم با مقدار 12 میلی‌لیتر سنتیلاتور تجاری Hisafe3 مخلوط گردید. جهت تعیین میزان غلظت پرتوزایی 14C از دستگاه شمارنده سنتیلاسیون مایع استفاده شد. با استفاده از مقادیر بدست آمده از اندازه‌گیری بتای نمونه‌های سنتزی برحسب شمارش بر دقیقه (cpm) و شمارش نمونه بنزن سنتز شده از استاندارد مدرن اگسالیک اسید، محاسبه سن روی نمونه‌ها انجام گرفت. نتایج بدست آمده، سن 8 نمونه مورد بررسی را برحسب BP (قبل از سال 1950) در محدوده مقادیری از ٢١۰ تا ۳٨٩۰ سال نشان داد. بازده دستگاه شمارنده سنتیلاسیون مایع بکار رفته در این اندازه‌گیری‌ها برای شمارش ذرات بتای رادیوکربن حدود ٩٢% و میزان خطای محاسبه نتایج برای نمونه‌هایی با سن کم 40± سال و برای نمونه‌های با قدمت زیاد 100± سال بدست آمد.}, keywords_fa = {سالیابی با رادیوکربن,شمارنده سنتیلاسیون مایع,نمونه‌های باستانی‌,کربن- 14,بنزن}, url = {https://jonsat.nstri.ir/article_530.html}, eprint = {https://jonsat.nstri.ir/article_530_b78b57d8cddc5cb8928687ef42195e1b.pdf} } @article { author = {Shayesteh, M and Shahriari, M and Raisali, Gh}, title = {Time and Space Dependent Neutronic Calculations Using TDMC Monte Carlo Code}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {29}, number = {3}, pages = {12-19}, year = {2008}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Time-dependent behavior of fission reactors is simulated using Monte Carlo method and a code named TDMC is developed for neutron parameters calculations. Parameters such as reactivity, neutron life time, space distribution of flux, and power with several groups of delayed neutrons are calculable by the code. Material composition and system boundaries may be changed as time-dependent in the code. The results which have obtained with the code are in good agreement with the benchmark problems results.}, keywords = {Multiplying Systems,Monte-Carlo Method,Neutronic Parameters,Time-Dependent Behavior,Space and Time-Dependent Flux,Time-Dependent Power}, title_fa = {محاسبات نوترونیک وابسته به زمان و مکان با استفاده از کد مونت‌کارلوی TDMC}, abstract_fa = {بر اساس روش مونت کارلو، رفتار وابسته به زمان رآکتورهای شکافت شبیه‌سازی شده و کدی با عنوان TDMC برای حساب کردن پارامترهای نوترونی توسعه داده شده است. پارامترهایی مانند رآکتیویته، طول عمر نوترون، توزیع مکانی شار و قدرت سیستم با احتساب چندین گروه نوترون تأخیری بصورت تابعی از زمان قابل حساب کردن با این کد می‌باشند. امکان تغییر در ترکیب مواد و مرزهای سیستم بصورت تابعی از زمان، از قابلیت‌های این کد است. نتایج بدست آمده توافق خوبی را با مقادیر بدست آمده از سایر روش‌های متداول نشان می‌دهد.}, keywords_fa = {سیستم‌های تکثیرکننده,روش مونت-کارلو,پارامترهای نوترونی,رفتار وابسته به زمان,شار وابسته به مکان و زمان,توان وابسته به زمان}, url = {https://jonsat.nstri.ir/article_531.html}, eprint = {https://jonsat.nstri.ir/article_531_ff44010dfe89670a301932c7461e4ef0.pdf} } @article { author = {Tajik, M and Ghasemi zad, A}, title = {The Study of Two, Three and Four Dimensional Nonlinear Dynamics of Nuclear Fission Reactors and Effective Parameters on its Behaviour}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {29}, number = {3}, pages = {20-27}, year = {2008}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {In this research, new physical fission reactor parameters which have very sensitive effects on the qualitative behavior of a reactor, are introduced. Therefore, the two, the nonlinear dynamics of two, three and four dimensional, considering almost the effective parameters are formulated for describing nuclear fission reactor systems. Using both analytical and numerical methods, the stability and instability of the given dynamical equations and the conditions of stability are studied in these systems. We have shown that the two parameters of the mean energy residence time in fuel and coolant and also their ratios have the most qualitative effects on the dynamical behaviour of a typical nuclear fission reactor. Increasing or decreasing of these parameters from a cartain limit can lead to stability or unstability in a given system.  }, keywords = {Nuclear Reactor,Nonlinear Dynamics,Mean Energy Residence Time,Stable,Unstable}, title_fa = {بررسی دینامیک غیرخطی دو بعدی، سه‌بعدی و چهار بعدی رآکتورهای شکافت و پارامترهای مؤثر بر رفتار آن}, abstract_fa = {در این کار تحقیقاتی، پارامترهای رآکتور فیزیکی جدیدی برای راکتورهای هسته‌ای معرفی کرده‌ایم که تغییر آنها باعث تغییر رفتار کیفی رآکتور می‌گردد. بر این اساس، فرمول‌بندی دینامیکی غیرخطی دو بعدی، سه بعدی و چهار بعدی با در نظر گرفتن تقریباً تمامی پارامترهای مؤثر بر رفتار رآکتور، به منظور توصیف سیستم‌های رآکتور شکافت هسته‌ای ارائه کرده‌ایم. با توجه به این معادلات، پایداری و ناپایداری سیستم دینامیکی ارائه شده و شرایط ایجاد پایداری در این سیستم‌ها، با استفاده از دو روش تحلیلی و عددی مورد بررسی قرار گرفته است. در این تحقیقات نشان داده‌ایم دو پارامتر زمان میانگین اقامت انرژی در سوخت و خنک‌کننده و هم چنین نسبت‌های آنها، بیشترین تأثیر کیفی را بر رفتار دینامیکی یک رآکتور شکافت هسته‌ای نوعی داشته و افزایش یا کاهش آن از حد مشخصی، می‌تواند منجر به ایجاد پایداری و ناپایداری در سیستم مورد نظر گردد.}, keywords_fa = {رآکتور شکافت هسته‌ای,دینامیک غیرخطی,زمان میانگین اقامت انرژی,پایداری,ناپایداری}, url = {https://jonsat.nstri.ir/article_532.html}, eprint = {https://jonsat.nstri.ir/article_532_c8c2a9a1daf16e442b7c149de5ca9516.pdf} } @article { author = {Cheraghpour, S and A.Milani, S and Salari, M and Kiaee, M}, title = {Separation of Fe (III) Ions from Acidic Leach Liquor of Metasummatite Saghand Ore by Anion Exchange Resins}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {29}, number = {3}, pages = {28-32}, year = {2008}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Ferric ions in dilute acidic leach liquor of uranium ore of Saghand were separated by anion exchange resins. In this research, a simulated solution similar to the actual leach liquor of Saghand was prepared. The simulated solution which was containing chloride and ferric ions, rare earth elements, and some other impurities was treated by different types of Dowex anion exchange resins for ferric ions removal. It appeared that hydrochloric acidic concentration, resin types and particle sizes have a great impact on ferric ions adsorption. Dowex 1X4 (200-400 mesh) has the best adsorption of 91% in simulated solution and 79% in actual leach liquor of uranium ore of Saghand respectively.}, keywords = {Adsorption,Anionic Resins,DOWEX,Fe (III) Ions,Saghand}, title_fa = {جداسازی یون‌های آهن (III) از محلول فروشویی اسیدی سنگ‌های متاسوماتیت ساغند با استفاده از رزین‌های‌ آنیونی}, abstract_fa = {با توجه به وجود یون­های آهن در محلول­های فروشویی مواد معدنی، به ویژه در محلول فروشویی کانسنگ اورانیوم ساغند، همچنین با توجه به غلظت نسبتاً کم این یون­ها در محلول­های رقیق­شده، لزوم حذف یون­های آهن به روش تبادل یونی آشکار می­گردد. محلول فروشویی کلریدی، حاصل فرایند انحلال کانسنگ اورانیوم به وسیله کلریدریک اسید بوده و حاوی یون­های آهن (III) می­باشد. برای جداسازی این یون­ها و خالص­سازی محلول اصلی به منظور فراوری بهتر عناصر نادر خاکی، اورانیوم و توریوم ابتدا آزمایش­ها بر روی محلول ساختگی انجام گرفت؛ بدین منظور از رزین­های آنیونی استفاده شد. توانایی چند رزین بررسی و مشخص شد درصد جذب یون­های آهن از محلول کلریدی به عواملی مانند غلظت اسید، نوع رزین و اندازه­ ذرات رزین وابسته است. نتایج آزمایش­ها نشان ­داد که رزین Dowex 1X4 با دانه­بندی 200-400 مش بهترین بازیابی (91% جذب) را در جذب یون­های آهن دارد. رزین انتخابی روی محلول فروشویی کانسنگ اورانیوم نیز آزمایش شد. میزان جذب آهن از این محلول، 79%  بود که با توجه به وجود یون­های مختلف دیگر در محلول فروشویی، قابل قبول می­باشد.}, keywords_fa = {جذب سطحی,رزین‌های آنیونی,DOWEX,یون‌های آهن(III),ساغند}, url = {https://jonsat.nstri.ir/article_533.html}, eprint = {https://jonsat.nstri.ir/article_533_7ca7e150704f949357261cd9ae9ec217.pdf} } @article { author = {Sadeghi, M and Afarideh, H and Ensaf, M.R and Shadan pour, N and Kiyomarsi, M}, title = {Selection of Suitable Reaction and Determination of Irradiation Parameters for Palladium-103 Production}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {29}, number = {3}, pages = {33-38}, year = {2008}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {To benefit greatly from 103Rh(p,n)103Pd cross section curve and to avoid formation of radionuclide 101Pd impurity, the proton incident and exit energy of 18 and 5 MeV, must be considered, using ALICE code and experimental results. According to SRIM code, the Rh thickness must be 480µm for 90º beam/target angle geometry. To minimize the thickness of the rhodium layer, and hence to reduce the price of rhodium target, the angle of beam target has been adgusted to 6 degrees so as to decrease the thickness to 48µm}, keywords = {Palladium-103,Excitation Function,Stopping power,Cyclotron,Cross Section,ALICE Code,SRIM Code}, title_fa = {انتخاب واکنش مناسب و تعیین پارامترهای پرتودهی برای تولید پالادیوم-103}, abstract_fa = { برای داشتن بهترین بهره از نمودار سطح مقطع واکنش 103Rh(p,n)103Pd و برای پرهیز از تولید ناخالصی 101Pd باید انرژی پروتون فرودی MeV18 و انرژی خروجی ذرات MeV5 باشد (حاصل از کد ALICE و نتایج تجربی). بر اساس کد SRIM، ضخامت لایه رودیوم در زاویه 90 درجه پرتابه نسبت به هدف باید µm480 باشد. برای کاهش ضخامت لایه رودیوم (در نتیجه کاستن قیمت هدف رودیوم) زاویه پرتابه نسبت به هدف 6 درجه تنظیم شده است تا ضخامت به µm 48 کاهش یابد.}, keywords_fa = {پالادیوم-103,تابع برانگیختگی,توان ایستانندگی,سیکلوترن,سطح مقطع,کد ALICE,کد SRIM}, url = {https://jonsat.nstri.ir/article_534.html}, eprint = {https://jonsat.nstri.ir/article_534_b58fea058f111f140eb06d45c0d07643.pdf} } @article { author = {Akhlaghi, M and Jalilian, A}, title = {Determination of Kryptofix 2.2.2 Concentration in [18F] FDG Radiopharmaceutical}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {29}, number = {3}, pages = {39-43}, year = {2008}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Concentration of kryptofix 2.2.2 in [18F]FDG solutions and standard solutions of kryptofix 2. 2.2 was determined by two methods: Visualization of combination of K2.2.2 with iodine vapor and iodoplatinate reagent. In both methods, concentration difference of K2.2.2 solutions was appeared as difference in color intensity of revealed spots on TLC. The detection limit of K2.2.2 by iodine vapor and iodoplatinate reagent is 25 and 2 ppm, respectively. Both methods can be used to release or reject the quality of [18F]FDG radiopharmaceutical for intravenous injection, but the second method is more suitable because of taking shorter time.}, keywords = {[18F]FDG,Quality Control,Kryptofix 2. 2. 2,Iodine Vapor,Iodoplatinate,Detection Limit,Thin Layer Chromatography}, title_fa = {تعیین غلظت کریپتوفیکس 2، 2، 2 در رادیوداروی [18F]FDG}, abstract_fa = {غلظت کریپتوفیکس 2،2،2 در محلول‌های [18F]FDG و استانداردهای کریپتوفیکس 2،2،2 به دو روش آشکارسازی (ترکیب کریپتوفیکس 2،2،2) با بخار ید و معرف یدوپلاتینات تعیین شد. در هر دو روش، تفاوت غلظت محلول‌های کریپتوفیکس، به صورت تفاوت در شدت رنگ لکه‌های آشکار شده بر روی TLC نمایان شد. حد تشخیص کریپتوفیکس با بخار ید و معرف یدوپلاتیتات به ترتیب ppm25 و ppm2 می‌باشد. هر دو روش را می‌توان برای پذیرش یا عدم پذیرش کیفیت رادیودارو برای تزریق وریدی بکار برد، اما روش دوم به علت نتیجه‌گیری در مدت زمان کوتاه‌تر، مناسب‌تر می‌باشد.}, keywords_fa = {[18F]FDG,کنترل کیفیت,کریپتوفیکس,بخار ید,یدو پلاتینات,حد تشخیص,کروماتوگرافی لایه نازک}, url = {https://jonsat.nstri.ir/article_535.html}, eprint = {https://jonsat.nstri.ir/article_535_0d970d5ce752196a3e0c29baba199cc5.pdf} } @article { author = {Jahanfarnia, G.R}, title = {Distribution of Impurities Concentration in Nucleate Boiling}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {29}, number = {3}, pages = {44-48}, year = {2008}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {The development of the mathematical model of mass transfer and diffusion process can determine the behavior of dissolved impurities in the flow boiling within viscous sublayer. Application of a new model to calculate the distribution of dissolved impuritiesconcentration within viscous sublayer and estimation of its thickness based on heat conduction layer and evaporation layer (macro-microlayer model) is the major goal of this study.}, keywords = {Viscous Sublayer,Impurities Transport,Flow Boiling,Concentration Ratio}, title_fa = {Distribution of Impurities Concentration in Nucleate Boiling}, abstract_fa = {The development of the mathematical model of mass transfer and diffusion process can determine the behavior of dissolved impurities in the flow boiling within viscous sublayer. Application of a new model to calculate the distribution of dissolved impuritiesconcentration within viscous sublayer and estimation of its thickness based on heat conduction layer and evaporation layer (macro-microlayer model) is the major goal of this study.}, keywords_fa = {Viscous Sublayer,Impurities Transport,Flow Boiling,Concentration Ratio}, url = {https://jonsat.nstri.ir/article_536.html}, eprint = {https://jonsat.nstri.ir/article_536_98f5503ce5af0f3ea3dba69a52cf8645.pdf} }