@article { author = {Mouraki, A. and Ghasri, M. and Mouraki, Gh. and E-Kasaei, P. and Ahadi, B. and Rahmati, A.}, title = {Preparation of flexible composites based on SBR as gamma shielding}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {41}, number = {3}, pages = {97-106}, year = {2020}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2020.1150}, abstract = {Today, humans are surrounded by countless sources of gamma radiation, and therefore, radiation shielding has always been a big concern. Different methods which are generally based on the use of lead-based metal and heavy shielding materials have been developed to absorb this radiation in recent years. Lead is not a good shield due to its high cost, toxicity and weight. The purpose of this study is to produce lightweight composites with the highest protective strength based on SBR rubber. Therefore, in order to produce anti-radiation rubber, various formulations were used. For this purpose, montmorillonite (MMT) Clay and various metal oxides such as Iron Oxide (Fe2O3), Zink Oxide (ZnO), Molybdenum Oxide (MoO3), and Titanium Oxide (TiO2) were used as filler. Then, the shielding properties of the composites made with Europium (152Eu) radioactive source in the energy range of 122 to 964 keV were investigated. The shielding properties of the composites including linear attenuation coefficient, absorption rate, half-value layer (HVL), and tenth-value layer (TVL), and other properties of rubber composites were studied by different analysis including mechanical strength, hardness, TGA, SEM. Among the samples tested, the sample containing MoO3 and MMT was the best material for absorbing these rays with an absorption rate of about 99%.}, keywords = {Gamma ray shielding,Metallic oxides,Montmorillonite,Composite,Styrene butadiene rubber}, title_fa = {تهیه کامپوزیت‌های انعطاف‌پذیر محافظ پرتوی گاما بر پایه لاستیک SBR}, abstract_fa = {در عصر فن­‌آوری، حفاظت در برابر منابع بی­‌شمار پرتوهای گامای موجود در محیط همواره یک دغدغه به شمار می­‌رود. در سال­‌های گذشته روش­‌های گوناگونی جهت جذب پرتوهای گاما گسترش یافته که به ­طور کلی بر استفاده از حفاظ­‌های فلزی و سنگین بر پایه سرب استوار است. سرب به ­دلیل هزینه زیاد، سمیت و سنگین بودن، حفاظ مناسبی محسوب نمی­‌شود. هدف از انجام این پژوهش، تهیه کامپوزیت­‌های سبک با بالاترین قدرت حفاظتی بر پایه لاستیک SBR ‌‌می­باشد. بنابراین فرمولاسیون­های مختلف جهت تهیه لاستیک­ ضدپرتو در دستور کار قرار گرفت. برای دست یابی  به این هدف، از خاک­رس مونت­موریلونیت (MMT) و اکسیدهای فلزی مختلف از قبیل اکسید آهن (3O2Fe)، اکسید روی (ZnO)، اکسید مولیبدن (3MoO) و اکسید تیتانیم (2TiO) به­ عنوان پرکننده استفاده شد. خواص حفاظتی کامپوزیت­‌های تهیه شده با چشمه پرتوزای یوروپیم (Eu152) در محدوده انرژی 122 تا keV 964 مورد ارزیابی قرار گرفت. برای بررسی خواص حفاظتی (ضریب ­تضعیف ­خطی، میزان جذب، ضخامت نیم ­لایه و ضخامت یک­ دهم لایه) و دیگر خواص کامپوزیت­‌های لاستیکی تهیه شده از آزمون‌­های کشش، سختی، TGA و SEM استفاده شد. از بین نمونه‌­های تهیه شده، نمونه‌­های حاوی 3MoOو MMT با میزان جذب 99%، بهترین عملکرد را برای جذب پرتوها از خود نشان دادند.}, keywords_fa = {محافظ پرتو گاما,اکسیدهای فلزی,مونت‌موریلونیت,کامپوزیت,لاستیک SBR}, url = {https://jonsat.nstri.ir/article_1150.html}, eprint = {https://jonsat.nstri.ir/article_1150_ab3e67de1cbeb9cc247a0f9690bcb505.pdf} }