@article { author = {lashkari, A. and Alikhani, M. and Ahangari, R. and Saberi, R.}, title = {Measurement of power reactivity coefficients using In-hour equation in Tehran Research Reactor}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {42}, number = {4}, pages = {80-89}, year = {2021}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {10.24200/nst.2021.1310}, abstract = {This paper uses a new technique to measure the power and temperature reactivity coefficients. In this method, the core reactivity changes due to the modifications in the power or temperature directly. The values of these coefficients are independent of the worth and positions of the control rods. This method is completely new and no report or article has been reported in this field. Increasing the core power causes negative reactivity due to the temperature feedback, and cooling the core makes positive reactivity. In this method, TRR is critical at constant power in natural cooling mode. After getting a relative equilibrium in inlet and outlet coolant temperature, the fly valve of the reactor is opened, so that the cooling mode of TRR changes from natural to the forced mode. Obviously, by establishing a cooling flow in a short time, all produced heat in the natural mode is removed by forced, then a positive reactivity is inserted. As a result, the positive reactivity increases the reactor power. By measuring the doubling time of the power growing, the value of the inserted reactivity is obtained using inhour equation in each initial power. The mean value of the power reactivity coefficient in TRR is about 1.02 pcm / kW that agrees with both results of the previous and recent simulations.}, keywords = {Research reactors,power reactivity coefficient,Temperature reactivity coefficients,natural cooling,MTR_PC code}, title_fa = {اندازه‌گیری ضریب راکتیویته توان با استفاده از معادله Inhour در رآکتور تحقیقاتی تهران}, abstract_fa = {در این مقاله از روش جدیدی برای اندازه‌­گیری ضریب راکتیویته دمایی و توان استفاده شد. در این روش میزان تغییرات راکتیویته کل قلب رآکتور در اثر افزایش دما یا توان به‌­طور مستقیم و مستقل از ارزش و موقعیت میله­‌های کنترل محاسیه می­‌گردد. این موضوع باعث کاهش خطا نسبت به روش اندازه­‌گیری از طریق موقعیت میله‌­های کنترل شد. استفاده از این روش کاملا جدید بوده و گزارش یا مقاله‌­ای در این زمینه گزارش نشده است. افزایش توان قلب باعث اعمال راکتیویته منفی در اثر فیدبک­‌های دمایی می­‌شود و بالعکس خنک­­ کردن قلب باعث اعمال راکتیویته مثبت می‌­شود. در این روش ابتدا رآکتور در حالت خنک­کنندگی طبیعی در یک توان ثابت بحرانی می‌­شود، سپس بعد از مدتی که تعادل گرمایی نسبی برقرار شد، با باز کردن شیر پروانه­­‌ای رآکتور رژیم خنک­کنندگی از حالت طبیعی به حالت اجباری تغییر داده می‌­شود. بدیهی است با برقراری جریان خنک­‌کنندگی در زمان کوتاه تمام گرمای تولید شده در قلب در اثر گردش طبیعی به یک­باره از بین رفته و یک راکتیویته مثبت معادل با توان رآکتور تزریق می­‌شود. تزریق این مقدار راکتیویته باعث افزایش توان رآکتور می­‌شود. با اندازه­‌گیری زمان دو برابر شدن توان، مقدار راکتیویته تزریقی با استفاده از معادله inhour به‌­دست می­‌آید. متوسط ضریب راکتیویته توان در محدوده آزمایش‌های انجام شده در حدود pcm/KW 02/1 اندازه‌­گیری شد که مقدار آن هم با نتایج مطالعات قبلی و هم نتایج شبیه­‌سازی‌­ها سازگار است.}, keywords_fa = {رآکتورهای تحقیقاتی,ضریب راکتیویته توان,ضرایب راکتیویه دمایی,خنک‌شوندگی طبیعی}, url = {https://jonsat.nstri.ir/article_1310.html}, eprint = {https://jonsat.nstri.ir/article_1310_be79c2a4851e9eeeecdaa61ebefc0ac6.pdf} }