@article { author = {Karimpour, K and Safdari, S.J and Mousavian, S.M.A}, title = {Sodium Fluoride Pellets Use in UF6 and HF Chemical Traps}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {30}, number = {1}, pages = {43-48}, year = {2009}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Sodium fluoride is one of the most important adsorbents in enrichment facilities, where it is availabe in the form of powder and pellets. Linear and parabolic curve of the reaction between uranium hexafluoride and sodium fluoride, in the form of powder, in comparison with the parabolic curve of sodium fluoride in the form of pellets is shown that it is the best shape for the sodium fluoride adsorbents. But, it is impossible to determine these properties only by comparison of UF6 and NaF reaction kinetics and, selecting the shape and dimension requires the study of the effects of loading and pressure drop. In this paper, effects of adsorbents shape on pressure drop and capacity is studied. Based on these studies, it was realized that as the dimension of adsorbents decreases, the active surface area increases and cansequently, the final capacity of the adsorption decreases.}, keywords = {Sodium Fluoride,Uranium hexafluoride,Chemical Trap,Absorber Pellets,Powder,Adsorption,Surface Area,Pressure Drop}, title_fa = {بررسی کارایی قرص سدیوم فلوراید در تله‌های شیمیایی صنایع غنی‌سازی}, abstract_fa = {جاذب سدیوم فلوراید، که یکی از پرکاربردترین جاذب‌های مورد استفاده در صنایع غنی‌سازی اورانیوم است، بصورت اشکال پودری و قرص‌های استوانه‌ای در دسترس می‌باشد. حالت خطی-سهموی سرعت واکنش میان اورانیوم هگزافلوراید و سدیوم فلوراید در حالت پودری شکل در مقایسه با روند سهموی-لگاریتمی برای حالت قرصی شکل (به سبب کاهش ناگهانی سرعت واکنش) در نگاه نخست انتخاب پودر سدیوم فلوراید به‌ عنوان جاذب تله‌های شیمیایی را توجیه‌پذیر می‌کند. ولی باید توجه داشت که انتخاب شکل و حالت جاذب تنها با بررسی سینتیک واکنش امکان‌پذیر نمی‌باشد و برای بررسی این امر لازم است پارامترهای دیگری از جمله افت فشار و ظرفیت نهایی جذب نیز مورد توجه قرار گیرد. بر این اساس، اثرهای شکل و اندازه جاذب بر پارامترهای ذکر شده مورد بررسی قرار گرفت. این بررسی‌ها نشان داد اگرچه در نگاه نخست اولویت استفاده با شکل پودری جاذب سدیوم فلوراید است ولی کاهش افت فشار و افزایش ظرفیت جاذب در اثر افزایش اندازه ذرات مهمترین عواملی هستند که سبب می‌شوند تا در واکنش‌های کمپلکسی مانند آنچه در واکنش میان اورانیوم هگزافلوراید و سدیوم فلوراید رخ می‌دهد، جاذب‌های پودری، یا ذرات کوچکتر مورد استفاده قرار نگیرند.}, keywords_fa = {سدیوم فلوراید,اورانیوم هگزافلوراید,تله شیمیایی,قرص‌های جاذب,پودر,جذب سطحی,مساحت سطحی,افت فشار}, url = {https://jonsat.nstri.ir/article_512.html}, eprint = {https://jonsat.nstri.ir/article_512_25bd972caf611b4309f5cfa54a42d950.pdf} }