@article { author = {Raisali, G and Dehghani Moghadam, M and Hamidi, S and Ghafoori, M and Solimanian, A and Shahvar, A and Arbabi, K}, title = {Investigation on the Effect of Chamber Wall Aluminum Alloy on the Response of Free-Air Well-Type Ionization Chamber for 137CS, 57Co and 241Am Gamma Rays}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {28}, number = {3}, pages = {36-43}, year = {2007}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {Free-air well-type ionization chambers are used in brachytherapy medical centers for measurement of brachytherapy source strengths. In this investigation, the HDR-33004 free-air well-type ionization chamber has been simulated using MCNP-4C computer code for several aluminum alloys as chamber wall material. The relative response (electric current) behavior of the simulated chamber for various source positions along the chamber central axis has been calculated and shows good agreement with measured values. We have also observed that the calculated and measured reference points are situated at the same positions. The results showed that the calculated electric current for unit source strength of 137Cs does not depend on the chamber wall aluminum alloy type, but for 57Co and 241Am sources, a strong dependency on the type of aluminum alloy as chamber wall material is observed. The presence of high atomic number elements such as zinc in some aluminum alloys resulted in higher response of the chamber. It is also found that for similar Al-7091 alloys the calculated and measured responses for 137Cs, 57Co and 241Am sources are in good agreement, showing that the alloy type of the chamber wall material would likely be an alloy similar to Al-7091. The results of this investigation can be applied for design of free-air well-type ionization chambers for low energy gamma sources.}, keywords = {Well-type Ionization Chamber,Energy Response,Chamber Wall,Gamma Sources,Air-Kerma Strength,MCNP}, title_fa = {بررسی تأثیر نوع آلیاژ آلومینیوم بکار رفته در دیواره اتاقک یونش چاهکدار مرتبط با هوای آزاد بر پاسخ اتاقک در انرژی پرتوهای گامای Cs137، Co57 و Am241}, abstract_fa = {اتاقک‌های یونش چاهکدار مرتبط با هوای آزاد در مراکز پرتو درمانی برای اندازه‌گیری شدت چشمه‌های براکی تراپی به کار می‌روند. در این کار پژوهشی با استفاده از کد مونت کارلوی MCNP-4C، اتاقک یونش چاهکدار مدل HDR-33004 شبیه‌سازی شده است. پاسخ اتاقک (جریان الکتریکی) شبیه‌سازی شده برای مکانهای مختلف چشمه در طول محور مرکزی اتاقک، رفتار مشابهی با نتایج حاصل از اندازه‌گیری‌ داشت و مکان مرجع اندازه‌گیری در اتاقک شبیه‌سازی شده با مکان مرجع اندازه‌گیری شده در اتاقک مدل HDR 33004 یکسان بود. نتایج حاصل نشان داد که مقدار جریان حساب شده به ازای واحد شدت برای چشمه Cs137 بستگی چندانی به نوع آلیاژ آلومینیوم به کار رفته در دیواره اتاقک ندارد، ولی برای چشمه‌های Co57 و Am241، نوع آلیاژ آلومینیوم دیواره اتاقک تأثیر قابل ملاحظه‌ای در پاسخ اتاقک دارد و وجود عناصری با عدد اتمی بالا مانند روی در آلیاژهای آلومینیوم بکار رفته در دیواره اتاقک، باعث افزایش در پاسخ اتاقک برای چشمه‌های Co57 و Am241 می‌شود. همچنین مشخص شد که برای آلیاژهای مشابه Al-7091 پاسخ‌های حساب شده آشکارساز و اندازه‌گیری شده برای چشمه‌های Cs137، Co57 و Am241 در توافـق خوبـی با یکـدیـگرند که ایـن نشـان‌دهنـده بـکارگیـری آلیـاژهایـی مانند Al-7091 در سـاخت اتاقـک مـدل HDR-33004 می‌باشد. از نتایج به دست آمده در این تحقیق می‌توان در طراحی اتاقک‌های یونش چاهکدار مرتبط با هوای آزاد برای چشمه‌های گامای کم انرژی استفاده کرد.}, keywords_fa = {اتاقک یونش چاهکدار,پاسخ انرژی,دیواره اتاقک,چشمه‌های گاما,شدت کرمای هوا,MCNP}, url = {https://jonsat.nstri.ir/article_596.html}, eprint = {https://jonsat.nstri.ir/article_596_529230295efad383dab376d17d9b8ac3.pdf} }