@article { author = {Baninajarian, M and Ravanbod, M and Aghahoseini, M}, title = {Investigation and Determination of Trace Amounts of Chloride in Zirconium with Turbidimetric and Nephelometric Methods}, journal = {Journal of Nuclear Science and Technology (JONSAT)}, volume = {26}, number = {1}, pages = {49-54}, year = {2006}, publisher = {Nuclear Science and Technology Research Institute}, issn = {1735-1871}, eissn = {2676-5861}, doi = {}, abstract = {A precise procedure is used for determination of chloride in the nuclear grade zircaloy (containing <20 ppm chloride) which is necessary in the nuclear industry. In this investigation, an appropriate method for chemical analysis of chloride in zirconium metal and zirconium alloys is developed. In this approach the effective parameters in Turbidity such as pH, residence time of solutions in darkness, silver ion concentration and light effects have been  investigated and optimized. The proposed method is compared with the spectrophotometric determination of chloride by mercury (II) thiocyanate through calibration and standard addition methods. The obtained results by turbidimetric and nephelometric methods are confirmed with the spectrophotometric method. In the range of 0.1-2 ppm, the concentration and turbidity are linearly related, having a correlation coefficient of r = 0.997. The detection limit of the proposed method is 0.03 ppm and the relative standard deviation for five repeated experiments of 0.2, 0.5, 1.0 and 1.5 ppm of chloride are 9.0, 6.2, 3.0 and 2.0 percent, respectively.}, keywords = {Zirconium,Chloride,Turbidimetry,Nephelometry,Spectrophotometers,pH Value-Quantitative Chemical Analysis}, title_fa = {بررسی و اندازه‌گیری مقادیر ناچیز کلرید در زیرکونیوم به ‌روشهای کدورت‌سنجی و نفلو‌متری}, abstract_fa = {برای اندازه‌گیری کلرید موجود در آلیاژهای زیرکونیوم روش دقیقی با کیفیت کاربرد هسته‌ای ارائه شده است. مقدار مجاز کلرید در این آلیاژها با چنین کاربردی کمتر از 20 قسمت در میلیون می‌باشد. در این بررسی، روش مناسبی با استفاده از واکنش کلرید با یون نقره برای آنالیز شیمیایی یون کلرید در فلز زیرکونیوم بکار رفته است. ویژگیهای این روش سادگی، سرعت عمل، ارزان بودن و سهولت کاربرد آن در کنترل کیفی خط تولید می‌باشد. در این روش پارامترهای مؤثّر در ایجاد کدورت، از جمله: pH، مدّت نگهداشتن محلولها در غیاب نور، غلظت یون نقره و نقش نور مورد بررسی و بهینه‌سازی قرار گرفته‌اند. روش کدورت‌سنجی بکار رفته، با روش طیف‌سنجی نوری با استفاده از جیوه (II) تیوسیانات و با دو روش منحنی کالیبراسیون و افزایش استاندارد مقایسه شد. نتایج بدست آمده از روش کدورت‌سنجی با اختلاف جزیی توسط روش طیف‌سنجی نوری تأیید شد. رابطه بین غلظت و کدورت در این روش در ناحیه غلظتی  0.1-2 میلی‌گرم بر لیتر کلرید، خطی بوده و ضریب همبستگی آن r = 0.997است. حد تشخیص غلظت در این روش 0.03  میلی‌گرم بر لیتر بوده و انحراف استاندارد نسبی در مورد پنج آزمایش تکراری با غلظت‌های 2.0  ، 0.5، 1.0  و 1.5 میلی‌گرم بر لیتر کلرید به ترتیب برابر با 9.0 ، 6.2 ، 3.0  و 2.0  درصد می‌باشد.}, keywords_fa = {زیرکونیوم,کلرید,کدورت‌سنجی,نفلو‌متری,طیف‌سنج‌های نوری,میزان اسیدیته,تجزیه کمی شیمیایی}, url = {https://jonsat.nstri.ir/article_701.html}, eprint = {https://jonsat.nstri.ir/article_701_2f067a493180fe980d9c79733b13eb90.pdf} }