پژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138320171122Safety Enhancement of Tehran Research Reactor with a Second Shutdown Systemارتقاء ایمنی راکتور تحقیقاتی تهران با سیستم خاموشی دوم112162FAاحسانبوستانیپژوهشگاه علوم و فنون هسته ای، سازمان انرژی اتمی ایرانصمدخاکشورنیاپژوهشگاه علوم و فنون هسته ای، سازمان انرژی اتمی ایرانابراهیمعابدیپژوهشگاه علوم و فنون هسته ای، سازمان انرژی اتمی ایرانJournal Article20160925Safety and related categories are of importance in all fields of nuclear industry, especially as regards the nuclear reactors. One of the most important safety aspects in the nuclear reactors is the shutdown system, each reactor requiring at least one. One of capabilities that can improve the safety of a nuclear reactor is adding another shutdown system to it. For making any change as design and locating second shutdown system in the reactor, attention to special characteristics of any reactor and design basis criteria such as redundancy, diversity, separation, single failure criteria and fail-safe mode is necessary. A second shutdown system based on the injection of neutron absorber is designed with considering its standards and requirements for Tehran Research Reactor. The proposed design has a high reliability that fulfils the most important design requirement, which is having enough negative reactivity, has the ability to maintain the reactor in subcritical state in a determined period of time with the necessary safety margin and for needed time duration. Calculations and simulations have been done using MCNPX code. This design has some negative effects on different core characteristics, albeit minimized by the designed structure optimization.مقولهی ایمنی و دستهبندی مرتبط با آن، از مسائل مهم در همهی زمینههای صنعت هستهای، و بهویژه راکتورهای هستهای است. از جمله مهمترین جنبهی ایمنی در راکتورهای هستهای، وجود سیستمهای خاموشی است که هر راکتور حداقل یکی از آنها را دارد. یکی از قابلیتهایی که میتواند ایمنی یک راکتور هستهای را بالا ببرد اضافه کردن یک سیستم خاموشی دیگر به آن است. برای انجام هر تغییری مثل طراحی و جا نمایی سیستم خاموشی دوم در راکتور، توجه به ویژگیهای خاص هر راکتور و معیارهای مبنای طراحی از جمله افزونگی، تنوع، استقلال، معیارهای تک نقص و حالت خود ایمن، ضروری است. یک سیستم خاموشی دوم برمبنای تزریق جاذب نوترون برای راکتور تحقیقاتی تهران با توجه به معیارها و الزامات مربوط به این راکتور طراحی شده است. طرح پیشنهاد شده اعتمادپذیری بالایی دارد که توانایی براورده کردن مهمترین شرط طراحی، یعنی داشتن راکتیویتهی منفی مورد نیاز را داشته باشد. علاوه بر این بتواند راکتور را در بازهی زمانی مشخص، با حاشیهی ایمنی لازم و برای مدت زمان مورد نیاز زیر بحرانی کند. محاسبات و شبیهسازیها با استفاده از کد محاسباتی MCNPX انجام شده است. این طرح اندکی اثر منفی روی مشخصههای مختلف قلب دارد که با بهینهسازی ساختار طراحی شده، آثار منفی ناشی از به کارگیری سیستم خاموشی دوم کمینه شده است.https://jonsat.nstri.ir/article_162_b8af4cda73f33629c1e841e21593d268.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138320171122Neutronic Investigation of Fissionable Spallation Targets in Accelerator Driven Systemsبررسی نوترونی هدفهای تلاشی شکافتپذیر در سیستمهای واداشته با شتابدهنده1323163FAمحمد امینامیرخانی دهکردیپژوهشکدهی رآکتور و ایمنی هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمیمصطفیحسنزادهپژوهشکدهی رآکتور و ایمنی هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمیJournal Article20160407Spallation process is the most important neutron generation method in industry, medicine, etc. This process in the subcritical reactor core is also another technique. In this research, we study the neutronic behavior of the spallation targets consisting of U-238 and Th-232 materials, by MCNPX code. The parameters under study comprise the spallation neutron yield, deposition energy, target geometry; angular spectrum of the neutron output, gas rate and residual mass spectrum. The results show that geometry has the greatest impact on the neutron output spectrum, but not on the residual mass spectrum. Numbers of neutrons per energy unit are stable at higher energies of 1 GeV, then the changes in neutron generation rate are reduced. Furthermore, hydrogen which is the principal factor in swelling of spallation target, consists of about %88 of gas production.فرایند تلاشی، یکی از مهمترین روشهای تولید نوترون در صنعت، پزشکی و غیره است. همچنین از دیگر کاربردهای این فرایند، استفاده از آن در قلب راکتورهای زیربحرانی است. در این پژوهش، با استفاده از کد MCNPX، یک بررسی نوترونی بر روی هدفهای تلاشی شکافتپذیر شامل اورانیم-238 و توریم-232 صورت گرفته است. پارامترهای بهرهی تولید نوترون و انرژی انتقال یافته، شکل هندسی هدف، طیف زاویهای خروجی نوترونها، نرخ تولید گاز و طیف جرمی عناصر باقیمانده برای هدفهای تلاشی مورد نظر بررسی شدهاند. نتایج نشان میدهد که شکل هندسی، در طیف خروجی نوترون بیشترین تأثیر را داشته است، ولی بر روی طیف اتمهای تولیدی اثری ندارد. در انرژیهای بالاتر از GeV 1، تعداد نوترونهای تولیدی در واحد انرژی به حالت پایدار میرسد و نرخ تغییرات تولید نوترونها بعد از آن کاهش مییابد. علاوه بر این، هیدروژن عامل اصلی در ایجاد تورم در هدف تلاشی است و حدود 88% از گاز تولیدی را تشکیل میدهد.https://jonsat.nstri.ir/article_163_87381aaf6767eb1f4b194ab6aa1bd0fb.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138320171122Determination of Probability Distribution Function of Optical Density in Industrial Radiographic Films by X-Rayتعیین تابع توزیع احتمال چگالی نوری در فیلمهای رادیوگرافی صنعتی با پرتو ایکس2433164FAمحمدتقانساسانپورپژوهشکدهی کاربرد پرتوها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانعلیطاهریپژوهشکدهی کاربرد پرتوها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانرضاقلی پورپیوندیپژوهشکدهی کاربرد پرتوها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانJournal Article20160622In this paper, the optical density distribution function obtained from the radiographic films at the voltages of 80-150 kV was investigated. Steel plates of 30×30 mm<sup>2</sup> with thicknesses of 2 and 8 mm were irradiated according to the European standards with different currents at various times. The information of the radiographic films was converted into 8-bit numeric data by using a laser scanner with a resolution of 3200 dpi. The histograms obtained from these scans were compared with all applicable probability functions. Due to the large number of the employed probability functions, their compatibility was first assessed on the best and simplest histogram. Afterwards, the selected functions were used for the remaining films. In this way, the best probability distribution function was determined. The same steps were taken for radiographic defects. Furthermore, the degree of adaptation of the probability distribution functions applied to the base metal and the defects regions was also evaluated.در این مقاله به بررسی تابع توزیع چگالی نوری حاصل از فیلم رادیوگرافی در ولتاژهای 80 الی kV 120 پرداخته شده است. صفحات فولادیcm<sup>2</sup> 30×30 به ضخامتهای 2 و mm 8 براساس استانداردهای اروپایی با شدت جریانها و زمانهای مختلف تحت تابش قرار گرفتهاند. اطلاعات فیلمهای رادیوگرافی با اسکنر لیزری به دادههای عددی بر مبنای دادههای 8 بیتی با قدرت تفکیک dpi 3200 تبدیل شدهاند. هیستوگرامهای حاصل از این اسکنها با تمام توابع احتمال موجود مقایسه شدهاند. به علت فراوانی توابع احتمال، ابتدا میزان انطباق آنها بر بهترین و سادهترین هیستوگرام بررسی شد. سپس توابع انتخاب شده برای فیلمهای باقیمانده بهکار رفتند. به این ترتیب بهترین تابع توزیع احتمال مشخص شد. همین مراحل برای عیوب رادیوگرافی نیز به اجرا درآمدند. همچنین میزان انطباق توابع توزیع احتمال به کار برده شده برای حالت زمینه و عیوب نیز بررسی شد.https://jonsat.nstri.ir/article_164_60d5ce8c36d13e4d8d02ccd44ecd66f1.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138320171122Experimental Study of Quench Properties on Bi-2223/AgMg High Temperature Superconducting Tapeمطالعهی تجربی انتشار فرونشانی روی نوار ابررسانای دما بالای Bi-2223/AgMg3440165FAمهنازعبدالهی درگاهپژوهشکدهی فیزیک پلاسما و گداخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمینیرهعبداللهی قهیپژوهشکدهی فیزیک پلاسما و گداخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمیناصرعلی نژادپژوهشکدهی فیزیک پلاسما و گداخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمیJournal Article20160622Since the local quench which induces electro-thermal instability if a local energy input exceeds a certain threshold called minimum quench energy (MQE), the normal zone propagates along the superconductor. Therefore, the rate of the normal zone spreading as a quench propagation velocity (<em>ν</em><sub>q</sub>) is an important factor in the quench detection and protection. This paper focuses on the measurement of <em>ν</em><sub>q </sub>as a self-protection parameter in a short sample of a high temperature superconducting Bi-2223/AgMg tape by applying the localized heat pulses, and MQE as a superconducting stability criterion. In addition, the current dependences of MQE and <em>ν</em><sub>q </sub>were verified in which by increasing the transport current, the rate of decreasing of MQE and the rate of increasing of <em>ν</em><sub>q</sub> were measured. These experiments have been done in nitrogen vapor without applying any magnetic field. از آنجا که فرونشانی موضعی، عامل ناپایداری حرارتی- الکتریکی در مگنتهای ابررساناست، اگر انرژی موضعی از حد معینی که به آن حداقل انرژی فرونشانی (MQE) گفته میشود <br />بیشتر شود، ناحیهی عادی در ابررسانا منتشر خواهد شد. بنابراین، نرخ رشد ناحیهی عادی به عنوان سرعت انتشار فرونشانی (<em>ν</em><sub>q</sub>) عامل مهمی در آشکارسازی فرونشانی و حفاظت محسوب میشود. در این مقاله، با اِعمال تپهای حرارتی موضعی، MQE به عنوان معیاری از پایداری، و <em>ν</em><sub>q</sub> به عنوان کمیت خود- محافظی ابررسانا در برابر فرونشانی بر روی طول کوتاهی از نوار ابررسانای دمابالای Bi-2223/AgMgاندازهگیری شده است. علاوه بر این، وابستگی MQE و <em>ν</em><sub>q</sub> به جریان کاری بررسی شد به طوریکه با افزایش جریان، نرخ کاهش MQE و نرخ افزایش <em>ν</em><sub>q</sub> به دست آمده است. این آزمایشها تحت بخار نیتروژن و بدون اِعمال میدان مغناطیسی انجام شده است.https://jonsat.nstri.ir/article_165_12568f69060091562216106e72bb1b40.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138320171122Optimization of Electrodeposition Parameters for Preparation of Bismuth-Based Superconductorبهینهسازی پارامترهای الکتروشیمیایی در سنتز ابررسانای سرامیکی پایه- بیسموت4147166FAهادیعادل خانیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانمجتبیاحمدیدانشکدهی مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیرهوشنگعراقی کزازدانشکدهی مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیرJournal Article20160427In this paper, BSCCO bismuth-based superconductor material is prepared by the electrodeposition method. The electrolyte compositions are based on bismuth nitrate [Bi(NO<sub>3</sub>)<sub>3</sub>] copper nitrate [Cu (NO<sub>3</sub>)<sub>2</sub>], calcium nitrate [Ca(NO<sub>3</sub>)<sub>2</sub>], strontium nitrate [Sr(NO<sub>3</sub>)<sub>2</sub>] and DMSO [(CH<sub>3</sub>)<sub>2</sub>SO] as the solvents. The properties of BSCCO are studied by X-ray diffraction (XRD) and scanning electron microscope (SEM). In the electrodeposition method, copper (Cu) and silver (Ag) are used as the anode and cathode, respectively. The optimal efficiency for electrodeposition of a superconductor material is observed at voltage: 5V and temperature: 55˚C. BSCCO-2212 phase in the electrodeposited sample is confirmed by XRD. The sample shows nano-leaf morphology, with a transition temperature (<em>T</em><sub>c</sub>) is 85 K.در این پژوهش، ماده ابررسانای سرامیکی پایه- بیسموت (BSCCO) به روش رسوب الکتروشیمیایی تهیه، و خواص آن مطالعه شده است. الکترولیت مورد استفاده بر پایهی ترکیبات نیترات بیسموت [Bi(NO<sub>3</sub>)<sub>3</sub>]، نیترات مس [Cu(NO<sub>3</sub>)<sub>2</sub>]، نیترات کلسیم [Ca(NO<sub>3</sub>)<sub>2</sub>] و نیترات استرانسیم [Sr(NO<sub>3</sub>)<sub>2</sub>] در حلال دیمتیلسولفواکسید [DMSO, (CH3)2SO]<br /> است. [CH<sub>3</sub>)<sub>2</sub>SO , DMSO] از آند مسی (Cu) و کاتد نقرهای (Ag) برای تهیهی رسوب الکتروشیمیایی استفاده شده است. در شرایط اختلاف پتانسیل 5V و دمای <sup>0</sup>C 55، بهینه پتانسیل و دما برای تولید رسوب مادهی ابررسانا مشاهده شد. طیف پراش پرتو- ایکس (XRD)، وجود فاز 2212-BSCCO را در نمونه تأیید کرد. این نمونه، یک ساختار<br /> نانو- برگشکل با دمای گذار (<em>T</em><sub>c</sub>) 85 K را نشان میدهد.https://jonsat.nstri.ir/article_166_3affad098412185cdca3ab583f4cfb36.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138320171122The Removal of Fluoride Ions from Wastewater Produced During Uranium Recovery in Three Groups of Uranium Conversion Factory Scraps Using Chemical Precipitation Methodحذف یون فلوئورید از پسماندهای حاصل از بازیابی اورانیم از سه دسته تهماند کف استخرهای کارخانهی فراوری اورانیم با استفاده از روش ترسیب شیمیایی4857167FAراضیهنمکیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانرامینیاوریپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانرضاداورخواهپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانشانلینظامیپژوهشکدهی مواد و سوخت هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانJournal Article20160711In the present research work, high concentration amounts of fluoride ions in nuclear waste produced during uranium recovery from the three groups of uranium conversion factory scraps (C36, C37, 56P) were removed by the chemical precipitation method. In this method, calcium chloride due to its high solubility in water and lower sludge production in comparison with other compounds of calcium was used as a precipitant agent. The effects of different parameters such as: the type and concentration of coagulant, pH, the concentration ratio of calcium to fluoride, time and rate of stirrer, aging time and the temperature of precipitation on the removal of fluoride were optimized. The results show that the yield of fluoride removal in these samples relates to all of these parameters with the exception of temperature. In spite of the theoretical calculations, the amount of fluoride in final wastewater for C36, C37, 56P decreases to 3.6, 5.8 and 4.6 ppm, respectively, which can be released to the environment directly at a slight dilution. The results show that calcium chloride in the optimized conditions, is a suitable precipitant agent for the effective decrease of high concentration of fluoride in the real sample. Also, the performed experiment, by using the industrial grade calcium chloride product, shows the similar result which confirms the possibility of this method being used in industry.در کار تحقیقاتی حاضر، مقادیر بالای یون فلوئورید موجود در پسماندهای حاصل از بازیابی اورانیم از سه دسته تهماند کف استخرهای کارخانهی فراوری اورانیم (C36، C37 و56P)، با استفاده از روش ترسیب شیمیایی حذف شد. در این روش از کلسیم کلرید به دلیل حلالیت بالاتر آن در آب و تولید مقادیر لجن کمتر نسبت به سایر ترکیبات کلسیمدار، به عنوان عامل رسوبدهنده استفاده شد و پارامترهای مؤثر بر میزان حذف این عنصر از پسماندها نظیر انتخاب نوع منعقدکننده و غلظت بهینهی آن، PH، نسبت کلسیم به فلوئورید، زمان و سرعت<br /> همزدن، زمان پیرسازی و دمای رسوبگیری بهینهسازی شدند. نتایج حاصل از این آزمایشها نشان داد که بهرهی حذف فلوئورید در هر سه دسته پسماند مورد مطالعه به پارامترهای ذکر شده به غیر از دما وابسته است. همچنین برخلاف محاسبات تئوری (به دلیل حضور سایر کاتیونها و آنیونهای موجود در ماتریس پسماندها وکمک در ترسیب فلوئورید) میزان باقیماندهی فلوئورید در پسماند نهایی برای هر سه دسته C36، C37 و56P به ترتیب به 3.6، 5.8 و mg/l 4.6 کاهش یافت که با اندکی رقیقسازی به زیر حد مجاز رسید و بنابراین قابل دورریزی مستقیم به محیط زیست خواهد بود. نتایج حاصل از آزمایشها نشان میدهد که استفاده از کلسیم کلرید در شرایط بهینهسازیشدهی پارامترهای مورد بررسی، عامل ترسیبدهندهی مناسبی برای کاهش مؤثر مقادیر بسیار بالای فلوئورید از نمونههای حقیقی است. همچنین آزمایشهای انجام شده با نمونهی صنعتی کلسیم کلرید تکرار نتایج فوق را نشان میدهد که قابلیت صنعتی شدن این روش را اثبات میکند.https://jonsat.nstri.ir/article_167_491b80f98ce035a2c2f6a5b6c80b361b.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138320171122Simulation of Ground Motion and Development of Earthquake Attenuation Relationships for Boushehr NPP Site Using the Stochastic Finite Fault Methodشبیهسازی جنبش نیرومند زمین و ارائهی روابط کاهندگی برای ساختگاه نیروگاه اتمی بوشهر براساس روش تصادفی گسل محدود5872168FAمحمد رضاآرمپژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانعلیحسنخانیپژوهشگاه بینالمللی زلزلهشناسی و مهندسی زلزله تهرانJournal Article20161106According to the IAEA and USNRC (United State Nuclear Regulatory Commision) regulations, calculating a strong ground motion during an earthquake is of great importance for the design of nuclear facilities, especially nuclear power plants. In the absence of precise seismic studies and in case of severe earthquakes, many radioactive contaminants are released into the environment, with irreparable physical and financial losses, hazarding the nuclear facilities, people and the environment. In this research, in order to develop the earthquake attenuation relationships for Boushehr, an important region, simulation of the ground motion was used along with the stochastic finite fault method. The results obtained from the simulation have been compared with the results obtained from the valid world relations for the Zagros region. Evidently, they show good consistency. The proposed model is a theory-empirical relationship of the Bushehr susceptible region, which can be used to assess the safety of the existing nuclear power plant in Boushehr and to design new nuclear power plants in the future. <br /> براساس مقررات IAEA و USNRC، محاسبهی جنبش نیرومند زمین در هنگام زلزله، برای طراحی سازههای حاوی مواد پرتوزا، به ویژه نیروگاههای اتمی از اهمیت زیادی برخوردار است. در صورت عدم بهکارگیری مطالعات دقیق لرزهخیزی و وقوع زلزلههای شدید، آلایندههای بسیاری از انواع مواد پرتوزا در محیط رها میشوند و ضررهای جانی و مالی جبرانناپذیری به تأسیسات هستهای، مردم و محیط زیست وارد خواهد شد. در این پژوهش به منظور ارائهی روابط کاهندگی معتبر برای منطقهی مهم بوشهر، از شبیهسازی جنبش نیرومند زمین به روش تصادفی (احتمالی) گسل محدود استفاده شده است. نتایج به دست آمده از شبیهسازی و نیز رابطهی کاهندگی حاصل، با نتایج استخراج شده از روابط معتبر جهانی و روابط ارائه شده برای منطقهی زاگرس مقایسه شدهاند و همخوانی خوبی را نشان میدهند. مدل پیشنهادی در این مطالعه، رابطهی کاهندگی تئوری- تجربی برای منطقهی حساس بوشهر است که میتواند برای ارزیابی ایمنی نیروگاه اتمی موجود، و برای طراحی واحدهای جدید نیروگاه اتمی در این منطقه استفاده شود.https://jonsat.nstri.ir/article_168_2f8d8561fa3e83d1f1d93bd835bf6511.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138320171122The Effect of Gamma Irradiation on the Shelf-Life and Quality Characteristics of Fresh Barberry Fruitاثر تابشدهی گاما بر ماندگاری و ویژگیهای کیفی میوهی زرشک تازه7386169FAحمیدرضااخوانبخش علوم و مهندسی صنایع غذایی، دانشکده کشاورزی، دانشگاه شهید باهنر کرمانسمیرابرنجی اردستانیپژوهشکدهی کاربرد پرتوها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایرانمحمدفاضلگروه علوم و صنایع غذایی، دانشکده کشاورزی، دانشگاه آزاد اسلامی واحد خوراسگانJournal Article20161024Gamma irradiation has shown to greatly reduce potential microbiological risk of fresh fruits, resulting in improved microbial safety as well as extending their shelf life. The effects of 0.5-2 kGy gamma doses on some physicochemical, microbial and sensory properties of fresh barberry fruits (<em>Berberis vulgaris</em>) during the refrigerated storage for 40 days were evaluated. The decrease trend of titratable acidity and an increase trend of pH and total soluble solid were reduced by gamma radiation during storage. The weight loss of the packed barberry was not significant between control and treated samples. The total anthocyanin and total phenolic contents of barberry fruits decreased in a dose-dependent manner immediately after irradiation and after subsequent storage. Gamma irradiation did not affect color indices of the fresh berberis fruits, but a significant decrease in color indices were observed during the storage time. The microbial growth was significantly inhibited, especially at doses higher than 1.5 kGy during the storage. Based on the panelist suggestion, the samples irradiated at >1.25 kGy were still between the acceptance limit at the end of the storage period. In general, it is recommended that according to the effect of gamma radition on physicochemical, microbial and sensorial characteristics, doses of 1.25-2 kGy could be used.تابشدهی گاما به علت بازدارندگی رشد میکروبی در میوههای تازه، میتواند ایمنی و ماندگاری آنها را افزایش دهد. در این پژوهش میوهی زرشک تازه تحت تأثیر تابش گاما در دزهای 0.5 تا kGy2 قرار گرفت و برخی از ویژگیهای فیزیکوشیمیایی، میکروبی و حسی آن در طی 40 روز نگهداری ارزیابی شد. در طی نگهداری، روند کاهشی اسیدیته و افزایشی pH و محتوای مواد جامد محلول در اثر تابشدهی مشاهده شد. از نظر اُفت وزن، تفاوت معنیداری بین شاهد و تیمارها مشاهده نشد. بلافاصله پس از تابشدهی، محتوای ترکیبات فنولی و آنتوسیانین کل با افزایش دز تابشدهی کاهش یافت و این روند کاهشی در طی نگهداری نیز مشاهده شد. تابشدهی، شاخصهای رنگ میوهی زرشک را تحت تأثیر قرار نداد، اما در طی نگهداری به صورت معنیداری کاهش یافتند. تابشدهی به ویژه در دزهای بالاتر از kGy 1.5 سبب بازدارندگی رشد میکروبی در طی دورهی نگهداری شد. براساس نظر ارزیابها، نمونههای تابشدهی شده در دزهای بالاتر از kGy 1.25 در انتهای دورهی نگهداری قابل مصرف بودند. به طور کلی، با توجه به تأثیر تابش بر ویژگیهای فیزیکوشیمیایی، میکروبی و حسی، دامنهی دز 1.25 تا kGy 2 برای افزایش ماندگاری میوهی زرشک میتواند استفاده شود.https://jonsat.nstri.ir/article_169_f3e1b5c90a07c45c94bc50cb31590dad.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138320171122Proton Acceleration Enhancement in Frequency Chirped Laser Pulse
Interaction with Plasmaفزایش شتابدهی پروتون در برهمکنش پالس لیزر چِرپ شده با پلاسما8794170FAالنازیزدانی1. پژوهشکدهی لیزر و اپتیک، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی
2. گروه فیزیک، دانشکدهی علوم پایه، دانشگاه تربیت مدرسJournal Article20160912Proton acceleration process by the generated sheath in the rear-side of an Al target in the interaction of P polarized laser with the pulse<span style="text-decoration: line-through;">s</span> duration of ≥40 fs and intensity of 3.6×10<sup>19</sup> W cm<sup>-2 </sup>has been experimentally and numerically studied. The results show that by employing the positively chirped pulse, the proton cut off energy and the number of the accelerated protons are increaesd in comparison with an unchirped and negatively chirped pulse interactions. After that, the electron heating process in interaction of positivly and negativly chirped pulse is investigated and correlation between the chirped parameter and produced electrostatic field in the backside of the target is studied. Particle- in-cell simulation results show that the electron heating process and consequently the electrostatic field for proton acceleration goal are significantly increased by employing the positively chirped pulse campared to negativly unchirped conditions.<span style="font-size: small;">سازو</span><span style="font-size: small;">کار شتاب</span><span style="font-family: Times New Roman;"></span><span style="font-size: small;">دهی پروتون از غلاف تشکیل شده در پشت هدف آلومینیم در برهمکنش لیزر با قطبش </span><span style="font-family: Times New Roman;">P</span><span style="font-size: small;">، با پهنای زمانی fs 40 <</span><span style="font-size: small;"> و شدت </span><span style="font-family: Times New Roman;">Wcm<sup>-2</sup></span><span style="font-size: small;"> </span><span style="font-size: small;"><span style="font-size: small;"> 3.6</span><span style="font-size: small;">×</span>10<sup>19</sup></span><span style="font-size: small;">به طور تجربی و شبیهسازی مطالعه شده است.</span><span style="font-size: small;">نتایج نشان دادند که انرژی ماکزیمم و همچنین تعداد پروتونهای شتاب گرفته با اِعمال چِرپ</span> <span style="font-size: small;">مثبت در مقایسه با حالت برهمکنش بدون چِرپ و چِرپ منفی افزایش مییابد. سپس فرایند گرم شدن الکترونها در برهمکنش با پالس لیزر با چِرپ مثبت و منفی بررسی، و رابطهی بین پارامتر چِرپ و میدان الکترواستاتیکی تولید شده در پشت هدف مطالعه شده است. نتایج شبیهسازی نشان دادند که در برهمکنش لیزر با چِرپ مثبت در مقایسه با چِرپ منفی و حالت بدون چِرپ، فرایند گرم شدن الکترونها و همچنین میدان الکتریکی ایجاد شده به منظور شتابدهی پروتونها، افزایش چشمگیری مییابد.</span>https://jonsat.nstri.ir/article_170_31486297b66333206954211fabbcbca9.pdfپژوهشگاه علوم و فنون هستهایمجله علوم و فنون هسته ای1735-187138320171122Study on Effects of Process Variables on the Yield of Ammonium Uranyl Carbonate Precipitation from Uranyl Nitrate-Ammonium Carbonate Solutionsبررسی تأثیر متغیرهای فرایندی بر بهرهی رسوبدهی آمونیوم اورانیل کربنات از محلولهای اورانیل نیترات و آمونیوم کربنات95104171FAمحمد حسنصادقی1. شرکت سوخت رآکتورهای هستهای، سازمان انرژی اتمی ایران 2. دانشکدهی مهندسی انرژی، دانشگاه صنعتی شریفمحمداتوکش1دانشکدهی مهندسی انرژی، دانشگاه صنعتی شریفمحمدرضاقاسمیشرکت سوخت رآکتورهای هستهای، سازمان انرژی اتمی ایرانامینزارعانشرکت سوخت رآکتورهای هستهای، سازمان انرژی اتمی ایرانJournal Article20161219Ammonium uranyl carbonate (AUC), an intermediate material in the process of conversion of yellowcake to uranium hexafluoride, was produced by injection of an aqueous solution of ammonium carbonate (AC) into uranyl nitrate solution. The target parameter in optimization of this process was the yield of the precipitation, as morphology and size distribution of AUC play no role in its post processing to UF<sub>6</sub>. The aim of the current study was the experimental investigation of the effects of the process variables on the yield of AUC precipitation. The results showed that the flow rate and flow pattern of the injection of the AC solution, aging time, impeller speed, and temperature had little effects on the yield of AUC precipitation. On the other hand, the yield was increased by increasing the ammonium carbonate to uranyl nitrate molar ratio, ammonium carbonate concentration, and uranyl nitrate concentration. However, it decreased by increasing the molar ratio of CO<sub>3</sub><sup>2-</sup> to NH<sub>4</sub><sup>+</sup> ions in the ammonium carbonate solution.<span style="font-size: small;">آمونیوم اورانیل کربنات یکی از محصولات میانی در فرایند تبدیل کیک زرد به گاز هگزا فلوراید اورانیم است که با تزریق محلول آمونیوم کربنات به محلول اورانیل نیترات تولید میشود. بهرهی رسوبدهی آمونیوم اورانیل کربنات، مهمترین پارامتر این فرایند محسوب میشود، زیرا مورفولوژی و توزیع اندازهی ذرات پودر آمونیوم اورانیل کربنات تولیدی در این فرایند به علت تبدیل شدن به هگزا فلوراید اورانیم اهمیت چندانی ندارد. در این پژوهش، به صورت تجربی تمامی پارامترهای فرایندی اثرگذار بر بهرهی رسوبدهی آمونیوم اورانیل کربنات در این فرایند بررسی، تحلیل شده است. نتایج نشان داد که پارامترهای دبی محلول آمونیوم کربنات، زمان ماند، سرعت همزن، الگوی تزریق محلول آمونیوم کربنات، و دمای رسوبدهی تأثیر چندانی بر کارایی رسوبدهی ندارند. افزایش پارامترهای نسبت مولی آمونیوم کربنات به اورانیل نیترات، درصد وزنی محلول آمونیوم کربنات، و غلظت اورانیم محلول اورانیل نیترات، سبب افزایش بهرهی رسوبدهی میشود. همچنین افزایش نسبت مولی یونهای کربنات به آمونیوم در محلول آمونیوم کربنات سبب کاهش بهره میشود.</span>https://jonsat.nstri.ir/article_171_4fcf810210264d4ca32a1593b120ad49.pdf