نوع مقاله : مقاله پژوهشی
نویسندگان
1 گروه فیزیک، دانشکدهی فیزیک شیمی، دانشگاه الزهرا، صندوق پستی: 1993893973، تهران ـ ایران
2 پژوهشکدهی فوتونیک و فناوریهای کوانتومی، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 13-14399511، تهران ـ ایران
3 پژوهشکدهی کاربرد پرتوها، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران، صندوق پستی: 3486-11365، تهران ـ ایران
چکیده
استفاده از منابع نوری همدوس برای ساخت دزیمترهای نوری بسیار مورد توجه است. دزیمترهای نوری بیشتر برای کاربردهای پرتودرمانی مورد استفاده قرار گرفته و برای چنین کاربردهایی اطلاع از وابستگی دمایی ضریب شکست ماده مورد استفاده در قلب دزیمتر، اغلب آب، موردنیاز است. در این کار، با برپایی و استفاده از یک تداخلسنج در محیط آزمایشگاه، وابستگی دمایی ضریب شکست آب اندازهگیری شده است. نوع چیدمان مورد استفاده به تفصیل توصیف شده و روابط نظری موردنیاز برای تفسیر دادههای تجربی بهدست آمده است. مقایسه نتایج با دادههای تجربی پیشین نشاندهندهی مطابقت مطلوب و صحت اندازهگیریها است. نشان داده شده است که مدل چندجملهای مرتبه دوم را میتوان به خوبی برای تفسیر دادههای اندازهگیری مورد استفاده قرار داد. نتایج ارایه شده در این مطالعه را میتوان برای کلیه کاربردهایی که در آنها اطلاع از وابستگی دمایی ضریب شکست آب پیشنیاز است به کار گرفت.
کلیدواژهها
عنوان مقاله [English]
Measuring the temperature variation of refractive index of water by digital interferometry for manufacturing an optical dosimeter
نویسندگان [English]
- S. Salimi Meidanshahi 1
- M.R. Rashidian Vaziri 2
- A.M. Beigzadeh 3
- F. Shahshahani 1
1 Department of Physics, Alzahra University, P.O.Box: 1993893973, Tehran - Iran
2 Photonics and Quantum Technologies Research School, Nuclear Science and Technology Research Institute, AEOI, P.O.Box: 14399511-13, Tehran-Iran
3 Radiation Application Research School, Nuclear Science and Technology Research Institute, AEOI, P.O.Box: 11365-3486, Tehran - Iran
چکیده [English]
Using coherent light sources for manufacturing optical dosimeters is of considerable interest. Optical dosimeters are mostly employed for radiotherapy applications; where knowing the temperature dependency of refractive index of the used material in the core of dosimeter, often water, is required. In this work, by setting up and employing an interferometer in the laboratory, the temperature dependency of refractive index of water is measured. The setup is fully described and the required theoretical relations for interpreting the experimental data are developed. Comparing the results with the previous experimental data provided by other groups, demonstrats good compromise and confirms the accuracy of the measurements. It is shown that the second-order polynomial model can be efficiently used for interpreting the measurement data. The results of this study can be used in all those applications where knowing the temperature dependency of refractive index of water is a prerequisite
کلیدواژهها [English]
- Optical dosimetry
- Water
- Refractive index
- Optical interferometer