نوع مقاله : مقاله پژوهشی
نویسندگان
1 پژوهشکدهی کشاورزی هسته ای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی ایران،
2 گروه فیزیک، دانشکدهی علوم، دانشگاه زنجان
3 پژوهشکدهی کشاورزی هستهای، پژوهشگاه علوم و فنون هستهای، سازمان انرژی اتمی
4 گروه فیزیک، دانشکدهی علوم، دانشگاه بینالمللی امام خمینی (ره)
چکیده
(با عرض پوزش چکیده مقاله به دلیل وجود مشکلات سایت با اشکال فراوان همراه است لطفا از روی پی دی اف مطالعه فرمایید)
دو رادیوایزوتوپ 18F (T1/2=109.7 min, Iβ+= 97%, Eβ+= 0.63 MeV) و 13N (T1/2=10min, Iβ+=100%, Eβ+=0.96 MeV)، min کامل تقریباً از طریق گسیل پوزیترون واپاشی میکنند. به همین سبب، از این دو رادیوایزوتوپ به منظور مقطعنگاری گسیل پوزیترون (پی ای تی) در تشخیص سلولهای سرطانی استفاده میشود. در این مقاله، پس از محاسبهی توابع برانگیختگی برای واکنشهای هستهای منجر به 18F, 18O (p, n) 18F, و 13N, 16O (p, α) 13N برای تولید با شتابدهندهی سیکلوترون و میزان حرارت سپرده شده به مایع هدف تعیین شد. برای برداشت حرارت ایجاد شدهی حاصل از پرتوی فرودی در هدف، یک مبدل حرارتی مینیاتوری طراحی و ساخته شد. طراحی حرارتی این مبدل با استفاده از نرمافزار Aspen HTFS+ انجام شد. نقشهی ساخت آن نیز با نرمافزار SolidWorks ترسیم شد. پس از ساخت مبدل حرارتی و جانمایی هدف مایع چرخشی در اتاق هدف مایع، تولید N13 از راه بمباران پروتونی آب خالص با انرژی MeV17.5 به منظور صحهگذاری محاسبات نظری انجام گرف.
کلیدواژهها
عنوان مقاله [English]
Investigation of 18F and 13N Radioisotopes Production Using Cyclotron Recirculating Liquid Target
نویسندگان [English]
- M Mirzaii 1
- Z Abdi 2
- K Yousefi 3
- M Rahimi 3
- T kAKAVAND 4
- SH Fazli 2
1
2
3
4
چکیده [English]
Two radioisotopes of 18F (T1/2=109.7 min, Iβ+= 97%, Eβ+= 0.63 MeV), and 13N (T1/2=10min, Iβ+=100%, Eβ+=0.96 MeV) decay almost completely via positron emission. Due to this characteristic, these radioisotopes are used in PET (positron emission tomography) camera for detection of cancer cells. In this article, after calculating the excitation function for nuclear reactions leading to the 18F, 18O (p, n) 18F, and 13N, 16O (p, α) 13N formation using the ALICE-91 nuclear code and by a comparison of the results with the experimental data, the best range of energy to produce with a cyclotron accelerator and the amount of heat deposited to the target material, was determined. For the waste heat removal, a miniature heat exchanger was designed and manufactured. A thermal design of the heat exchanger by the Aspen HTFS+ software was created, and its mechanical plan sheet was drawn using the SolidWorks software. After the fabrication of the heat exchanger and recirculation liquid target located at the liquid target room, 13N was produced via pure water proton bombardment with 17.5 MeV energies verifying the theoretical calculations.
کلیدواژهها [English]
- 18F
- 13N
- Positron Emitter
- Cyclotron
- Recirculation Liquid Target
- Miniature Heat Exchanger