1. S. Khanjani, et al, Effect of cut twisted tape and Al2O3 nanofluid on heat transfer of double tube heat exchanger, Modares Mechanical Engineering, 15 (11), 181-190(2015).
2. H. Aslani, M. Moghiman, Experimental investigation and fuzzy logic modelling of nanofluid solidification behavior, Modares Mechanical Engineering, 15 (11), 284-292 (2016).
3. S.U.S. Choi, Enhancing thermal conductivity of fluids with nanoparticles, In developments and applications of non-newtonian flows, ASME Fluids Engineering Division (FED), 66, 99- 103 (1995).
4. S. Tashakor, et al, Neutronic analysis of HPLWR fuel assembly cluster, Annals of Nuclear Energy, 50, 38-43 (2012).
5. J. Buongiorno, et al, Nanofluids for enhanced economics and safety of nuclear reactors: an evaluation of the potential features, issues, and research gaps, Nuclear Technology, 162 (1), 80-91 (2008).
6. F. Salimi, J. Salimi, A review of nanofluid applications in the field of heat transfer and mass transfer Scientific-Extension Quarterly , New Process, 42, (1392).
7. S.U.I. Ahmad, N.A. Aslam, Effect of different cross-section data sets on reflectors of a typical material test research reactor, Prog. Nucl. Energy, 48(2), 155-164 (2006).
8. R. Kianpour, G.R. Ansarifar, Assessment of the nano-fluid effects on the thermal reactivity feedback coefficients in the VVER-1000 nuclear reactor with nano-fluid as a coolant using thermal hydraulic and neutronics analysis, Annals of Nuclear Energy, 133, 623-636 (2019).
9. Y. Xuan, W. Roetzel, Conceptions for heat transfer correlation of nanofluids. International Journal of heat and Mass transfer, 43, 3701-3707 (2000).
10. M.H. Kayhani, et al, Experimental study of convective heat transfer and pressure drop of TiO2/water nanofluid. International Communications in Heat and Mass Transfer, 39 (3), 456-462 (2012).
11. C.H. Chon, et al, Empirical correlation finding the role of temperature and particle size for nanofluid (Al2O3) thermal conductivity enhancement. Applied Physics Letters, 87 (15), 153107 (2005).
12. Bushehr, VVER-1000 reactor, Final Safety Analysis Report (FSAR), Chapter 4, Ministry of Russian Federation of Atomic Energy (Atomenergoproekt), Moscow, (2003).
13. R. Kianpour, G.R. Ansarifar, M. Fathi, Optimal Design of a VVER-1000 Nuclear Reactor Core with Dual Cooled Annular Fuel based on the Reactivity Temperature Coefficients using Thermal hydraulic and Neutronic Analysis by implementing the Genetic Algorithms, Annals of Nuclear Energy, 148, 107682 (2020).
14. N.E. Todreas, M.S. Kazimi, Nuclear systems: thermal hydraulic fundamentals, CRC Press, (2011).
15. J.R. Lamarsh, Introduction to nuclear reactor theory, Addison-Wesley Reading, MA, (1966).
16. A. Koraniani, Optimal fuel richness design of Bushehr nuclear reactor based on thermohydraulic parameters and maximum radial power factor, Master Thesis, University of Isfahan, (1398).
17. D.L. Hetrick, Dynamics of Nuclear Reactors the University of Chicago Press Chicago and London, (1971).
