بررسی رفتار آشکارسازهای سوسوزن پلاستیک صفحه‌ای و میله‌ای در تشخیص مکان چشمه براساس تحلیل طیف انرژی

نوع مقاله : مقاله پژوهشی

نویسندگان

1 پژوهشگاه علوم و فنون هسته ای/دانشگاه شریف

2 مدیر گروه مهندسی هسته ای- دانشکده مهندسی انرژی- دانشگاه صنعتی شریف

3 پژوهشکده کاربرد پرتوها، پژوهشگاه علوم و فنون هسته‌ای، صندوق پستی: 1339-14155، تهران ـ ایران

4 پژوهشگاه علوم و فنون هسته ای، پژوهشکده کاربرد پرتوها

چکیده
چکیده: هدف این تحقیق تحلیل و مقایسه ویژگی‌های طیفی و مکانی آشکارسازهای پلاستیکی میله‌ای و صفحه‌ای است. در این راستا، تغییرات FWHM در لبه کامپتون طیف انرژی در موقعیت‌های مختلف چشمه برای هر دو نوع آشکارساز بررسی شد. برای این منظور، طیف انرژی آشکارسازها در موقعیت‌های مختلف چشمه ثبت و به‌طور جداگانه تحلیل گردید. ابعاد آشکارساز میله‌ای ۵ × ۵۰ سانتی‌متر و ابعاد آشکارساز صفحه‌ای ۵۰ × 5 × 50 سانتی‌متر بود. نتایج نشان می‌دهند که با افزایش فاصله چشمه از آشکارساز،FWHM در هر دو نوع آشکارساز افزایش می‌یابد؛ با این حال، این تغییرات در آشکارساز میله‌ای بیشتر از آشکارساز صفحه‌ای است. این تفاوت‌ها به ویژگی‌های هندسی و پراکندگی فوتون‌ها در هر آشکارساز بستگی دارد. علاوه بر این، نتایج نشان داد که آشکارسازهای میله‌ای قدرت تفکیک مکانی بالاتری دارند. این ویژگی‌ها می‌توانند در بهینه‌سازی طراحی هندسی آشکارسازها برای کاربردهایی مانند تصویربرداری هسته‌ای، توموگرافی صنعتی و و غیره مفید واقع شوند.

کلیدواژه‌ها

موضوعات


عنوان مقاله English

Investigation of the Behavior of Plate and Rod Plastic Scintillator Detectors in Source Positioning Based on Energy Spectrum Analysis

نویسندگان English

javad kochakpour 1
Seyed Abolfazl Hosseini, 2
Ali Taheri 3
Mojtaba Askari 4
1 nstri/sharif university
2 Department of Energy Engineering, Sharif University of Technology
3 Radiation Applications Research School, Nuclear Science and Technology Research Institute, P.O. Box:14155-1339 Tehran, Iran
4 Nuclear science and technology research institute
چکیده English

Abstract: The aim of this study is to analyze and compare the spectral and spatial characteristics of plastic rod and plate detectors. In this context, the variations in the FWHM at the Compton edge of the energy spectrum at different source positions for both types of detectors were investigated. For this purpose, the energy spectra of the detectors were recorded at various source positions and analyzed separately. The dimensions of the rod detector were 5 × 50 cm, and the dimensions of the plate detector were 50 × 5 × 50 cm. The results show that as the distance between the source and the detector increases, the FWHM increases in both types of detectors; however, the change is more pronounced in the rod detector compared to the plate one. These differences are attributed to the geometric characteristics and photon scattering behavior in each detector. Furthermore, the results indicate that the rod detector have higher spatial resolution. These features could be useful in optimizing the geometric design of detectors for applications such as nuclear imaging, industrial tomography, and others.

کلیدواژه‌ها English

Position-Sensitive Detector
Large Plastic Scintillator
Energy spectrum
Compton Scattering

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 18 خرداد 1404